Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Conductivity Calibration Solution 12.88 / 12.89 mS
- Product Code
- 424497, 467643, 00726684, 726684
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Standard Solution for calibration purposes
Manufacturers & Suppliers
Tintometer GmbH
manufacturer
Schleefstraße 8-12, 44287 Dortmund
+49 (0)231 94510-0
http://www.lovibond.com
The Tintometer Limited
distributor
Lovibond House, Sun Rise Way, Amesbury, Wiltshire SP4 7GR
+44 1980 664800
Emergency Contacts
Emergency Contact
+44 1235 239670
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
aqueous solution
Notes
Dangerous components: Void
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air.
Instantly wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water (at least 15 min). If symptoms persist, consult doctor.
Rinse out mouth and then drink 1-2 glasses of water. In case of persistent symptoms consult doctor.
Immediate Medical Attention
In case of persistent symptoms consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire fighting measures that suit the environment.
The product is not combustible. Formation of toxic gases is possible during heating or in case of fire.
Firefighter Protection
Wear self-contained breathing apparatus. Wear full protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Advice for non-emergency personnel: No special measures required. Advice for emergency responders: Protective equipment: see section 8
Do not allow product to reach sewage system or water bodies. Dilute with much water.
Absorb with liquid-binding material (sand, diatomite, universal binders).
Materials: sand, diatomite, universal binders
Related Products
Similar products with comparable safety profiles
1413μS Standard Conductivity Solution
---
HI 7030 Conductivity Calibration Solution
---
HI 70038 Conductivity Solution
---
GPC Calibration Standard Solution
---
35.00 ppt Salinity Calibration Solution
---
D-2887 Calibration Mix
---
PCB 28 standard solution
---
502.2 Calibration Mix #1
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions necessary if used correctly.
Store in cool location. Protect from heat and direct sunlight. Protect from the effects of light. Protect from humidity and keep away from water.
The usual precautionary measures should be adhered to general rules for handling chemicals. Do not eat, drink or smoke when using this product. Wash hands during breaks and at the end of the work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See item 7.
No chemical-protective gloves required.
Safety glasses use against the effects of fumes / dust Use safety glasses that have been tested and approved in accordance with government standards such as EN 166.
Not required.
Protective work clothing.
No further relevant information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at ambient temperature (room temperature).
see section 10.3
No further relevant information available.
No further relevant information available.
No further relevant information available.
see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Small amounts may be diluted with plenty of water and washed away. Dispose of bigger amounts in accordance with Local Authority requirements.
Small amounts may be diluted with plenty of water and washed away. Dispose of bigger amounts in accordance with Local Authority requirements.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Void
- Shipping Name
- Void
- Transport Class
- Class Void
- Packing Group
- Void
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Conductivity Calibration Solution 12.88 / 12.89 mS?
The signal word is no signal word.
What is the physical form of Conductivity Calibration Solution 12.88 / 12.89 mS?
Conductivity Calibration Solution 12.88 / 12.89 mS is a fluid with colourless color. It has odourless odor.
What is the solubility of Conductivity Calibration Solution 12.88 / 12.89 mS?
Fully miscible
What is Conductivity Calibration Solution 12.88 / 12.89 mS used for?
Standard Solution for calibration purposes
What is the melting point of Conductivity Calibration Solution 12.88 / 12.89 mS?
The melting point is 0°C and the boiling point is 100°C.