NextSDS Logo
Safety Data Sheet EN

VeroWhitePlus™, RGD835

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
VeroWhitePlus™, RGD835
Product Form
cartridge containing ink
Product Code
SDS-06124 EN A

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Printing inks

Uses advised against

This product is a cartridge containing ink. Under normal conditions of use, the substance is released from a cartridge only inside an appropriate printing system, and therefore, exposure is limited

Manufacturers & Suppliers

S

Stratasys Corporate headquarters

manufacturer

9600 West 76th Street Suite #108, Eden Prairie, MN 55344, United States

+1 952-937-3000

Emergency Contacts

Americas - Multi lingual response

+1 215 207 0061

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Dam. Cat. 1
Skin Sens. Cat. 1B
Carc. Cat. 2
Repr. Cat. 2
STOT SE Cat. 3
STOT RE Cat. 2

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 Causes skin irritation
H317 May cause an allergic skin reaction
H318 Causes serious eye damage
H335 May cause respiratory irritation
H351 Suspected of causing cancer
H361 Suspected of damaging fertility or the unborn child
H373 May cause damage to organs through prolonged or repeated exposure

Precautionary Statements

P201 Obtain special instructions before use
P202 Do not handle until all safety precautions have been read and understood
P260 Do not breathe dust/fume/gas/mist/vapors/spray
P264 Wash face, hands and any exposed skin thoroughly after handling
P271 Use only outdoors or in a well-ventilated area
P272 Contaminated work clothing must not be allowed out of the workplace
P280 Wear protective gloves/protective clothing/eye protection/face protection
P302 + P352 IF ON SKIN: Wash with plenty of water and soap
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
P308 + P313 IF exposed or concerned: Get medical advice/attention
P310 Immediately call a POISON CENTER or doctor
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention
P362 + P364 Take off contaminated clothing and wash it before reuse
P403 + P233 Store in a well-ventilated place. Keep container tightly closed
P405 Store locked up
P501 Dispose of contents/container to an approved waste disposal plant

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Mixture

Not a dangerous substance or mixture according to the Globally Harmonized System (GHS).

Chemical Name CAS Number Concentration Hazardous
Proprietary --- 10 - 30% No
Proprietary --- 10 - 30% No
Proprietary --- 10 - 30% No
Proprietary --- 10 - 30% No
Proprietary --- 10 - 30% No
Proprietary --- 1 - 3% No
Titanium dioxide 13463-67-7 0.3 - 1% No
camphene 79-92-5 0.1 - 0.3% No
Ethoxylated Trimethylolpropane Triacrylate 28961-43-5 0.1 - 0.3% No
Acrylic acid 79-10-7 0.1 - 0.3% No
Glycerol, propoxylated, esters with acrylic acid 52408-84-1 0.1 - 0.3% No
1,7,7-Trimethyltricyclo[2.2.1.02,6]heptane 508-32-7 0.1 - 0.3% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. Get medical attention immediately if symptoms occur. IF exposed or concerned: Get medical advice/attention.

Skin contact

Wash off immediately with soap and plenty of water for at least 15 minutes. In the case of skin irritation or allergic reactions see a physician.

Symptoms: May cause an allergic skin reaction.

Eye contact

Get immediate medical advice/attention. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Keep eye wide open while rinsing. Do not rub affected area.

Ingestion

Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Do NOT induce vomiting. Call a physician.

Immediate Medical Attention

Immediate medical attention is required.

Medical Treatment

May cause sensitization in susceptible persons. Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing agent suitable for type of surrounding fire. Class B fires: Use carbon dioxide (CO2), regular dry chemical (sodium bicarbonate), regular foam (Aqueous Film Forming Foam-AFFF), or water spray to cool containers.

Unsuitable media

CAUTION: Use of water spray when fighting fire may be inefficient.

Specific hazards

Product is or contains a sensitizer. May cause sensitization by skin contact.

Instructions

Cool containers with flooding quantities of water until well after fire is out. Move containers from fire area if you can do it without risk.

Firefighter Protection

Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment. Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid contact with skin, eyes or clothing. Use personal protective equipment as required. Ensure adequate ventilation. Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak.

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Pick up and transfer to properly labeled containers. Following product recovery, flush area with water.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid breathing vapors or mists. Wash thoroughly after handling. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Use only outdoors or in a well-ventilated area. Wear protective gloves and eye/face protection. Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment. Do not eat, drink or smoke when using this product. Heating may cause a fire.

Storage

Store in a cool, dry area away from potential sources of heat, open flames, sunlight or other chemicals. Store in a cool, well ventilated area. Store in accordance with local regulations. Keep container tightly closed. Store between 15 °C and 27 °C. Shipment temperature (up to 5 weeks) is -20 °C to 50 °C.

Hygiene

Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product.

Fire prevention

Heating may cause a fire. Store in a cool, dry area away from potential sources of heat, open flames, sunlight or other chemicals. Store in a combustible storage area away from heat and open flame.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Showers Eyewash stations Ventilation systems.

Hands

Wear suitable gloves. Impervious gloves.

Eyes

Tight sealing safety goggles.

Respiratory

No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.

Skin/Body

Wear suitable protective clothing. Long sleeved clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Ink cartridge
Colour
White
Colour Intensity
---
Form
---
Odor
Characteristic
Odor Threshold
No information available
Ph
---
Melting Point
No data available
Boiling Point
No data available
Flash Point
>= 100 - < 250 C / >= 212 < 482 F
Freezing Point
No data available
Softening Point
No information available
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No data available
Vapor Pressure
No data available
Vapor Density
No data available
Relative Density
1.10 g/cm3
Bulk Density
No information available
Density
---
Flammability
No data available
Upper Explosive Limit
No data available
Lower Explosive Limit
No data available
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
No data available
Solubility
No data available
Partition Coefficient
No data available
Solubility In Water
Insoluble in water
Solubility In Fat
---
Molecular Weight
No information available
Voc Content
No information available
Metal Corrosion
---
Dynamic Viscosity
No data available
Kinematic Viscosity
No data available
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Decomposes on exposure to light. Unstable if heated.

Reactivity

Heating may cause a fire.

Hazardous reactions

Uncured ink will polymerize on exposure to light.

Avoid

Avoid exposure to heat and light.

Incompatible

Not applicable under normal conditions of use and storage.

Decomposition

Thermal Decomposition Products. Combustion: oxides of carbon.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Ecotoxicity: Proprietary (1.98 mg/l Algae, 0.704 mg/l Fish, 0.524 mg/l Crustacea); Proprietary (120 mg/l Algae, 120 mg/kg Crustacea); Proprietary (Pseudokirchneriella subcapitata 96 h EC50 = 0.17 mg/l, Oncorhynchus mykiss 96 h LC50 = 27 mg/l, Daphnia magna 48 h EC50 = 95 mg/l); Proprietary (Pseudokirchneriella subcapitata 1.6 mg/l OECD 201, Fish 4.95 mg/l, Daphnia magna 2.36 mg/l OECD 202); Proprietary (> 2.01 mg/l Algae OECD 201, 6.53 mg/l Fish JIS K 0102-71, 3.53 mg/l Crustacea OECD 202); camphene 79-92-5 (1000 mg/L Algae, 0.72/150 mg/L Fish, 22 mg/L Crustacea); Ethoxylated Trimethylolpropane Triacrylate 28961-43-5 (1.95 mg/L Fish); Acrylic acid 79-10-7 (0.17/0.04 mg/L Algae, 222 mg/L Fish, 270/95 mg/L Crustacea); Glycerol, propoxylated, esters with acrylic acid 52408-84-1 (5.74 mg/L Fish).

Persistence and degradability

No information available.

Bioaccumulation

There is no data for this product. Component Information: Acrylic acid 79-10-7, Partition coefficient: 0.46

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

Other adverse effects

No information available.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.

Disposal

Dispose of in accordance with local regulations.

Waste Codes

U008 Acrylic acid RCRA
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3082
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for VeroWhitePlus™, RGD835?

The signal word is danger.

What is the physical form of VeroWhitePlus™, RGD835?

VeroWhitePlus™, RGD835 is a liquid appearing as ink cartridge with white color. It has characteristic odor.

What is the solubility of VeroWhitePlus™, RGD835?

No data available

What is VeroWhitePlus™, RGD835 used for?

Printing inks

What are the hazard statements for VeroWhitePlus™, RGD835?

This substance has 7 hazard statements:

  • H315: Causes skin irritation
  • H317: May cause an allergic skin reaction
  • H318: Causes serious eye damage
  • H335: May cause respiratory irritation
  • H351: Suspected of causing cancer
  • H361: Suspected of damaging fertility or the unborn child
  • H373: May cause damage to organs through prolonged or repeated exposure

What is the melting point of VeroWhitePlus™, RGD835?

The melting point is No data available and the boiling point is No data available.