SoChlor Granules (50% NaDCC)

Upon breathing difficulties or irritation of the respiratory tract: Bring the person into fresh air and stay with him/her.

Symptoms: irritation of the respiratory tract

Upon irritation: rinse with water. In the event of continued irritation, seek medical assistance.

Symptoms: irritation

Remove contact lenses. Flush eyes immediately with plenty of water or isotonic water (20-30 °C) for at least 5 minutes and continue until irritation stops. Make sure to flush under upper and lower eyelids. If irritation continues, contact a doctor. Continue flushing during transport.

Symptoms: irritation of the eye

Provide plenty of water for the person to drink and stay with him/her. In case of malaise, seek medical advice immediately and bring the safety data sheet or label from the product. Do not induce vomiting, unless recommended by the doctor. Have the person lean forward with head down to avoid inhalation of or choking on vomited material.

Symptoms: malaise

Alcohol-resistant foam, carbon dioxide, powder, water mist.

Waterjets should not be used, since they can spread the fire.

Fire will result in dense smoke. Exposure to combustion products may harm your health. Closed containers, which are exposed to fire, should be cooled with water.

Closed containers, which are exposed to fire, should be cooled with water.

Wear protective clothing as described in Section 8 of this safety data sheet. Wear suitable protective equipment, including gloves, goggles/face shield, respirator, boots, clothing or apron, as appropriate. Ensure suitable respiratory protection is worn during removal of spillages in confined areas. Avoid inhalation of dust and contact with skin and eyes. Wash thoroughly after dealing with a spillage.

Avoid discharge to lakes, streams, sewers, etc.

Wherever possible cleaning should be performed with normal cleaning agents. Avoid use of solvents.

Materials: normal cleaning agents

Smoking, drinking and consumption of food is not allowed in the work area.

Ambient temperature and humidity, in original packaging securely closed. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.

Smoking, drinking and consumption of food is not allowed in the work area.

Airborne gas and dust concentrations must be kept at a minimum. Provide efficient mechanical ventilation. If not possible use suitable respiratory equipment.

Chemical-resistant, impervious gloves complying with an approved standard should be worn if a risk assessment indicates skin contact is possible. Glove thickness (mm): As specified for glove type specified through individual use risk assessment. Breakthrough time (min.): As specified for glove type specified through individual use risk assessment. Standards: As specified for glove type specified through individual use risk assessment.

Chemical splash goggles or face shield, if an in-use risk assessment specifies it is necessary. Standards: As determined by specific, an in-use risk assessment. Under normal domestic and professional use, standard safety spectacles are adequate.

No specific requirements

Standard fabric garments (e.g. cotton overcoat or apron). However, in a professional setting, an in-use risk assessment should determine what is suitable.

Keep damming materials near the workplace. If possible, collect spillage during work. Keep container tightly sealed when not in use.

The product is stable under the conditions, noted in section 7 "Handling and storage".

Contact with acids liberates toxic gas. Warning! Do not use in combination with other products. May release dangerous gases (chlorine).

Contact with acids liberates toxic gas. The following materials may react with the product: Alkalis. Organic nitro compounds. Amines. Oxidising agents. Reducing agents. Moisture. Peroxides. Under normal conditions of storage and use, no hazardous reactions will occur.

Avoid heat, flames and other sources of ignition. Avoid exposure to high temperatures or direct sunlight.

Flammable/combustible materials. Moisture. Avoid contact with acids and alkalis. Avoid contact with strong oxidising agents. Avoid contact with strong reducing agents. Hydrocarbons. Inorganic nitrates. Inorganic nitrites. Organic compounds.

Heating may generate the following products: Carbon monoxide (CO). Oxides of nitrogen. Hydrogen chloride (HCl). Isocyanates. Chlorine.

Product is covered by the regulations on hazardous waste.

Dispose of contents/container to an approved waste disposal plant.