Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Millipore Chlorine Tablets
- Product Form
- Tablets
- Product Code
- ZWCL 01F 50
- Chemical Name
- Sodium Dichloroisocyanurate, dihydrate
- Synonyms
- Autoclean® tablets, Sanitization tablets, Chlorine tablets, Sodium Dichloro-S-triazinetrione dihydrate, Sodium Dichloroisocyanurate dihydrate; Chemical Abstract Name: 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, sodium salt, dihydrate
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Tablets for sanitizing water purification equipment.
Manufacturers & Suppliers
Millipore Corporation
manufacturer
290 Concord Road, Billerica MA 67124, USA
978-715-1335
Millipore S.A.S.
manufacturer
Boite Postale 116, Molsheim Cedex, France
33(0)3 90 46 90 00
Emergency Contacts
CHEMTREC
1-703-527-3887
CHEMTREC
1-800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS05
GHS07
GHS09
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium Dichloroisocyanurate, dihydrate EC: 220-767-7 | 51580-86-0 | 50% | Yes |
| Additives not classified as dangerous per 1999/45/EC | --- | 50% | No |
**The full text of the phrase is listed under heading 16.**
Notes
*Symbol letters and categories of danger: T+=Very toxic, T=Toxic, C=Corrosive, Xn=Harmful, XI=Irritant, E=Explosive, O=Oxidising, F+=Extremely flammable, F=Very flammable, N=Dangerous for the environment
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Immediately remove contaminated clothing and shoes. Wash with soap or mild detergent and large amounts of water for at least 10 minutes.
Wash eyes immediately with large amounts of water for at least 15 minutes. Occasionally lift the upper and lower lids.
Seek immediate medical attention.
Immediate Medical Attention
Get medical attention immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Sodium dichlorocyanurate dihydrate is not a flammable material, but enhances combustion of other substances. In addition, thermal decomposition takes place at temperatures above 240°C. This decomposition, with liberation of toxic vapors including chlorine, may be stopped by application of a water spray to cool the product. The following are also appropriate for fires involving this product: Non-ammonium dry chemical powder, alcohol-resistant foam, carbon dioxide.
Do not use fire extinguishers containing ammonium compounds. ABC Dry chemical extinguishers contain ammonium compounds.
Under fire conditions, Sodium dichlorocyanurate dihydrate forms toxic and irritating gases and fumes. See section 10.
Do not approach from the lee side if not fully protected as above.
Firefighter Protection
Chemically resistant turn-out gear and full face self contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Small Spills: Eliminate unnecessary traffic in area of the spill. Eliminate or extinguish all sources of ignition. Large Spills: Evacuate spill area! Maximize local ventilation by increasing exhaust system flow. Return to spill area only if using proper personal protective equipment as indicated in Section 8
Eliminate unnecessary traffic in area of the spill. Eliminate or extinguish all sources of ignition.
Evacuate spill area! Maximize local ventilation by increasing exhaust system flow. Return to spill area only if using proper personal protective equipment as indicated in Section 8
Do not wash material into sewer, or industrial waste water systems. Sodium dichlorocyanurate dihydrate is toxic to aquatic organisms.
Clean up the spilled product as quickly as possible after the release to prevent decomposition due to contamination with other materials. Carefully sweep spilled substance into dry containers, using non-combustible tools and containers.
Materials: non-combustible tools and containers. Do not absorb in saw-dust or other combustible absorbents
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes and skin. DO NOT handle directly. Wear gloves and use scoop / tongs / tools. Do not inhale dust or vapors. May be fatal if swallowed. Use personal protective equipment outlined in section 8. Avoid contact with clothing and other combustible materials.
Store tightly closed container in a cool, dry, well-ventilated area away from combustible and other incompatible substances.
Keep away from sources of ignition, such as heat, sparks, and flame
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Normal Handling Conditions: General room ventilation. Emergency Response Conditions: Local exhaust ventilation.
Normal Handling Conditions: Neoprene, Polyvinyl chloride, or nitrile gloves. Emergency Response Conditions: Chemically resistant gloves.
Normal Handling Conditions: Safety glass with side shields. Emergency Response Conditions: Full face air purifying respirator, or face shield over half face air purifying respirator. Use cartridges with declared suitability for chlorine gas.
Normal Handling Conditions: None required. Emergency Response Conditions: Full face Self-contained breathing apparatus.
Normal Handling Conditions: Laboratory coat, synthetic apron. Emergency Response Conditions: Chemically resistant jacket, pants, boots and head covering.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Unstable in humid air, and in contact with water. Begins to lose water of hydration at temperatures in excess of 100°C, and decomposes with the release of toxic and irritating gases and fumes at temperatures in excess of 240°C.
Unstable in humid air, and in contact with water.
Has not been reported.
Avoid generating dust, temperatures above 90°C, high humidity.
Strong oxidizing agents, moisture, strong bases, ammonium salts, organic and combustible materials, hypochlorites, nitrogenous materials, oils and fats.
Chlorine, hydrogen chloride, hypochlorous acid, cyanuric acid, nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Millipore Chlorine Tablets known by?
Millipore Chlorine Tablets is also known as: Autoclean® tablets, Sanitization tablets, Chlorine tablets, Sodium Dichloro-S-triazinetrione dihydrate, Sodium Dichloroisocyanurate dihydrate; Chemical Abstract Name: 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, sodium salt, dihydrate
What is the hazard signal word for Millipore Chlorine Tablets?
The signal word is danger.
What is the physical form of Millipore Chlorine Tablets?
Millipore Chlorine Tablets is a solid appearing as bright white solid (tablet) . It has chlorine odor.
What is Millipore Chlorine Tablets used for?
Tablets for sanitizing water purification equipment.
What are the hazard statements for Millipore Chlorine Tablets?
This substance has 6 hazard statements:
- H271: Strong oxidizer. Contact with combustible materials may cause a fire.
- H314: Causes severe digestive tract irritation and or burns.
- H314: Causes severe skin irritation and or burns.
- H318: Causes severe eye irritation and or burns.
- H335: Causes severe respiratory tract irritation.
- H400: Sodium Dichloroisocyanurate is considered to be an environmental hazard, and is very toxic to aquatic organisms, including fish.
What is the melting point of Millipore Chlorine Tablets?
The melting point is Decomposed at temperatures above 240°C. .