Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- fib-tem® S
- Product Code
- 503-16
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Kit component of in vitro diagnostic test for the examination of the blood coagulation system.
Manufacturers & Suppliers
Tem Innovations GmbH
manufacturer
Martin-Kollar-Strasse 13-15, D-81829 Munich, Germany
+49 (0)89 454295 0
Emergency Contacts
Toxicological Information Centre Munich
+49 (0)89 19240
24h/7d
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Kit (503-16-20) consists of 20x 503-16 and contains mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Albumins, blood serum EC: 232-936-2 | 9048-46-8 | 25 - 50% | Yes |
| calcium chloride EC: 233-140-8 | 10043-52-4 | 10 - 25% | Yes |
| sodium azide EC: 247-852-1 | 26628-22-8 | 0.1 - 1% | Yes |
For the wording of the listed risk phrases refer to section 16.
Notes
According to current knowledge no SVHC contained.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move individual to fresh air, seek medical advice in case of complaints.
Immediately rinse with water.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Call for a doctor immediately.
Immediate Medical Attention
No further relevant information available.
Medical Treatment
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter sewers/ surface or ground water.
Pick up mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent formation of dust.
Store between 2 - 8 °C. Do not seal receptacle gas tight.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves
Tightly sealed goggles
Suitable respiratory protective device recommended.
Do not allow to enter sewers/ surface or ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
Avoid contact with strong acids.
Sodium azide develops very toxic gases upon contact with acids.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
Harmful to aquatic life with long lasting effects.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
No further relevant information available.
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The product does not contain PBT or vPvB substances based on current knowledge.
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal must be made according to official regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Void
- Shipping Name
- Void
- Transport Class
- Void
- Packing Group
- Void
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for fib-tem® S?
The signal word is warning.
What is the physical form of fib-tem® S?
fib-tem® S is a powder with according to product specification color. It has characteristic odor.
What is fib-tem® S used for?
Kit component of in vitro diagnostic test for the examination of the blood coagulation system.
What are the hazard statements for fib-tem® S?
This substance has 3 hazard statements:
- H302: Harmful if swallowed.
- H319: Causes serious eye irritation.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of fib-tem® S?
The melting point is Not determined. and the boiling point is Not determined..