Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Sodium Hydroxide 50% Solution commonly used for laboratory, research or manufacturing use..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS05
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H314: Causes severe skin burns and eye damage.
Precautionary Statements
- P260: Do not breathe dust/fume/gas/mist/vapours/spray.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P303+P361+P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310: Immediately call a POISON CENTER/doctor.
- P405: Store locked up.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Avantor Performance Materials B.V.
manufacturer
P.O.Box 1 7400 AA Deventer The Netherlands
NL
(+31) (0)570 - 687500
(+31) (0)570 - 687574
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Environment Health & Safety department
(+31)(0) 570 687500
NL
during normal opening times (8 am till 5.30 pm)
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Mixture of the substances with harmless additions.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium Hydroxide EC: 215-185-5 | 1310-73-2 | 25-50% | ⚠️ Hazardous |
Additional Information
For the wording of the listed risk phrases refer to section 16.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
In case of unconsciousness bring patient into stable side position for transport.
🖐️ Skin Contact
If skin irritation continues, consult a doctor. Instantly wash with water and soap and rinse thoroughly.
👁️ Eye Contact
Rinse opened eye for several minutes under running water. Then consult doctor.
🍽️ Ingestion/Swallowing
Drink copious amounts of water and provide fresh air. Instantly call for doctor.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🧤 Hand Protection
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Butyl rubber, BR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
👁️ Eye Protection
Tightly sealed safety glasses.
😷 Respiratory Protection
In case of brief exposure or low pollution use breathing filter apparatus. In case of intensive or longer exposure use breathing apparatus that is independent of circulating air.
🦺 Skin/Body Protection
Protective work clothing.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1824
📦 Proper Shipping Name
SODIUM HYDROXIDE SOLUTION
⚠️ Transport Hazard Class
8
📋 Packing Group
II
🚛 ADR Transport Precautions
Warning: Corrosive substances.
🚢 IMDG Maritime Transport Precautions
Warning: Corrosive substances.
✈️ IATA Air Transport Precautions
Warning: Corrosive substances.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Sodium Hydroxide 50% Solution?
The signal word for this substance is "danger".
What is Sodium Hydroxide 50% Solution used for?
For Laboratory, Research or Manufacturing use.
What are the hazard statements for Sodium Hydroxide 50% Solution?
This substance has 1 hazard statements: H314: Causes severe skin burns and eye damage.
What is the melting point of Sodium Hydroxide 50% Solution?
The melting point is 12 C and the boiling point is 100 C.