QUATTROcare plus Spray AMERICA 2141

Remove person to fresh air and keep comfortable for breathing. In all cases of doubt, or when symptoms persist, seek medical advice.

Wash with plenty of soap and water. Take off contaminated clothing and wash it before reuse. When in doubt or if symptoms are observed, get medical advice.

Symptoms: Frequently or prolonged contact with skin may cause dermal irritation.

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. In case of troubles or persistent symptoms, consult an ophthalmologist.

Rinse mouth immediately and drink plenty of water. Do NOT induce vomiting. Observe risk of aspiration if vomiting occurs. Call a physician in any case!

Carbon dioxide (CO2), Foam, Extinguishing powder. Water mist. Co-ordinate fire-fighting measures to the fire surroundings.

Full water jet.

Extremely flammable aerosol. Vapors may form explosive mixtures with air. Heating causes rise in pressure with risk of bursting.

Move undamaged containers from immediate hazard area if it can be done safely.

Remove persons to safety. Evacuate area.

Do not allow uncontrolled discharge of product into the environment. Explosion risk.

Absorb with liquid-binding material. Clean contaminated articles and floor according to the environmental legislation.

Materials: sand, diatomaceous earth, acid- or universal binding agents

Observe instructions for use. Do not pierce or burn, even after use. Provide adequate ventilation. Do not breathe gas/fume/vapour/spray. Avoid contact with skin, eyes and clothes. Wear respiratory protection when in the presence of vapor, dust, and aerosols.

Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Avoid contact with skin, eyes and clothes.

Do not spray on naked flames or any incandescent material. Keep away from sources of ignition - No smoking. Take precautionary measures against static discharges.

Provide adequate ventilation as well as local exhaustion at critical locations.

Wear suitable gloves. EN ISO 374 The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Suitable material: NBR (Nitrile rubber) Breakthrough time (maximum wearing time) 480 min. Thickness of the glove material: 0,45 mm

Suitable eye protection: Tightly sealed safety glasses.

In case of inadequate ventilation wear respiratory protection. Wear respiratory protection when in the presence of vapor, dust, and aerosols. Respiratory protection necessary at: exceeding exposure limit values. Suitable respiratory protection apparatus: Combination filtering device (EN 14387) Filtering device with filter or ventilator filtering device of type: AX Observe the wear time limits as specified by the manufacturer.

Wear suitable gloves. Flame-retardant protective clothing. Wear anti-static footwear and clothing Wear suitable protective clothing.

Do not allow uncontrolled discharge of product into the environment. Explosion risk. Do not allow to enter into surface water or drains. Prevent spread over a wide area (e.g. by containment or oil barriers). Ensure all waste water is collected and treated via a waste water treatment plant.

Stable. The product is stable under storage at normal ambient temperatures.

Extremely flammable aerosol.

May occur. Vapors may form explosive mixtures with air. Heating causes rise in pressure with risk of bursting.

Keep away from sources of heat (e.g. hot surfaces), sparks and open flames. Protect against direct sunlight. Protect against: Frost. Take precautionary measures against static discharges.

Oxidizing agent. Pyrophoric or self-heating substances.

Gases/vapors, toxic (Carbon dioxide (CO2), Carbon monoxide, aldehydes, carbon black)

Dispose of waste according to applicable legislation.