NextSDS Logo
Safety Data Sheet EN

KaVo QUATTROcare plus Spray

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
KaVo QUATTROcare plus Spray
Product Code
1.005.4525, 1.011.4624, 1.005.3843
Synonyms
QUATTROcare plus Spray 2140, QUATTROcare plus Spray 2140P

Regulatory Identifiers

CAS Number
N/A

Identified Uses

The product is intended for professional use.

Manufacturers & Suppliers

Kaltenbach & Voigt GmbH logo

Kaltenbach & Voigt GmbH

manufacturer

Bismarckring 39, D-88400 Biberach

+49 (0) 7351 56 0

http://www.kavo.com/

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
White mineral oil (petroleum) EC: 232-455-8 8042-47-5 25 - 50% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Provide fresh air.

Skin contact

Wash with plenty of water. Change contaminated clothing.

Symptoms: skin irritation

Eye contact

Rinse immediately carefully and thoroughly with eye-bath or water.

Ingestion

Rinse mouth immediately and drink plenty of water.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide (CO2), Foam, Extinguishing powder.

Unsuitable media

Full water jet

Specific hazards

Extremely flammable. Combustible. Vapours can form explosive mixtures with air. Danger of bursting container.

Instructions

Use water spray jet to protect personnel and to cool endangered containers.

Firefighter Protection

Wear self-contained breathing apparatus. Wear protective gloves/protective clothing/eye protection/face protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not allow uncontrolled discharge of product into the environment.

Cleanup methods

Absorb with liquid-binding material

Materials: sand, diatomaceous earth, acid- or universal binding agents

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not pierce or burn, even after use.

Storage

Keep container tightly closed. Keep in a cool, well-ventilated place. Protect from frost. Protect against direct sunlight.

Fire prevention

Take precautionary measures against static discharges. Do not spray on naked flames or any incandescent material. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

If handled uncovered, arrangements with local exhaust ventilation should be used if possible.

Hands

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Suitable material: NBR (Nitrile rubber) Breakthrough time (maximum wearing time): >= 480 min. Thickness of the glove material: >= 0,45 mm DIN EN 374

Eyes

Tightly sealed safety glasses. (DIN EN 166)

Respiratory

In case of inadequate ventilation wear respiratory protection. Suitable respiratory protection apparatus: Combination filter device (DIN EN 141). Filtering device with filter or ventilator filtering device of type: AX

Skin/Body

Flame-retardant protective clothing. Wear anti-static footwear and clothing

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Crystallisation Point
---
Lower Explosive Limit
1 vol. %
Partition Coefficient
not determined
Flash Point
-80 °C
Freezing Point
---
Molecular Weight
---
Auto Ignition Temperature
not determined
Odor
characteristic
Solubility In Water
insoluble
Solidification Point
---
Explosive Limits
---
Softening Point
---
Upper Explosive Limit
11 vol. %
Physical State Data
aerosol
Physical State
liquid (Aerosol)
Vapor Pressure
not determined
Solubility In Fat
---
Relative Density
---
State Under Standard Conditions
---
Density
0,853 g/cm³ DIN 51757
Colour
light yellow
Dynamic Viscosity
not determined
Solubility
---
Ph
not applicable
Decomposition Temperature
not determined
Vapor Density
not determined
Boiling Point
-40 °C
Odor Threshold
not determined
Cloud Point
---
Colour Intensity
---
Evaporation Rate
not determined
Melting Point
not determined
Kinematic Viscosity
15,5 mm²/s
Properties Status
---
Relative Evaporation Rate
---
Metal Corrosion
---
Voc Content
---
Appearance
---
Bulk Density
---
Form
---
Flammability
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable under storage at normal ambient temperatures.

Reactivity

Extremely flammable, Ignition hazard.

Hazardous reactions

Vapours can form explosive mixtures with air. Heating causes rise in pressure with risk of bursting.

Avoid

Keep away from sources of heat (e.g. hot surfaces), sparks and open flames. Do not expose to temperatures above 50 °C.

Incompatible

No information available.

Decomposition

No known hazardous decomposition products.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
AEROSOLS
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is KaVo QUATTROcare plus Spray known by?

KaVo QUATTROcare plus Spray is also known as: QUATTROcare plus Spray 2140, QUATTROcare plus Spray 2140P

What is the hazard signal word for KaVo QUATTROcare plus Spray?

The signal word is danger.

What is the physical form of KaVo QUATTROcare plus Spray?

KaVo QUATTROcare plus Spray is a liquid (aerosol) with light yellow color. It has characteristic odor.

What is KaVo QUATTROcare plus Spray used for?

The product is intended for professional use.

What are the hazard statements for KaVo QUATTROcare plus Spray?

This substance has 2 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.

What is the melting point of KaVo QUATTROcare plus Spray?

The melting point is not determined and the boiling point is -40 °C.