Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Immunosuppressants Whole Blood Control
- Product Code
- 0082/RA Level I, 0083/RA Level II, 0084/RA Level III, 0085/RA Level IV
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
In vitro diagnostics, PC21 Laboratory chemicals, PROC15 Use as laboratory reagent
Manufacturers & Suppliers
Chromsystems Instruments & Chemicals GmbH
manufacturer
Am Haag 12, 82166 Gräfelfing, Germany
+49 89 18930-0
http://www.chromsystems.com
Emergency Contacts
advisory service
+49 30 19240
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Human whole blood, lyophilised
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Human whole blood | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Rinse out mouth and then drink plenty of water. If symptoms persist consult doctor.
Medical Treatment
Symptomatic treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions.
May produce toxic pyrolysis products.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter sewers/ surface or ground water.
Pick up mechanically.
Related Products
Similar products with comparable safety profiles
Serum Control
---
BD™ Stem Cell Control
---
Emicizumab Calibrator / Emicizumab Controls
---
ClinChek® Plasma Control for Lamotrigine and Sulthiame, Level I, II, lyophil.
---
Endocrine Urine Control
---
Urinalysis Control (Negative)
---
MULTITEST CD3/CD16+CD56/CD45/CD19 CE
---
Products Containing Antibody Diluent with Background Reducing Components
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions are necessary if used correctly.
Keep container tightly sealed. Store in dry conditions. Store below -18 °C.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374. Natural rubber, NR. Nitrile rubber, NBR.
Safety glasses
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No dangerous reactions known.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Product residues are to be disposed of in compliance with Directive 2008/98/EC on Waste and national and local requirements, e.g. in a suitable incineration plant. Leave chemicals in original containers. Transfer small quantities to approved transport containers. Protect collection receptacles and containers from access by unauthorized parties.
Product residues are to be disposed of in compliance with Directive 2008/98/EC on Waste and national and local requirements, e.g. in a suitable incineration plant.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Void.
- Shipping Name
- Void.
- Transport Class
- Void.
- Packing Group
- Void.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No further information available.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Immunosuppressants Whole Blood Control?
The signal word is no signal word.
What is the physical form of Immunosuppressants Whole Blood Control?
Immunosuppressants Whole Blood Control is a powder appearing as dark red with dark red color. It has odourless odor.
What is Immunosuppressants Whole Blood Control used for?
In vitro diagnostics, PC21 Laboratory chemicals, PROC15 Use as laboratory reagent
What is the melting point of Immunosuppressants Whole Blood Control?
The melting point is Undetermined. and the boiling point is Undetermined..