Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BD™ Stem Cell Control
- Product Code
- 340991
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sector of Use SU24 Scientific research and development, Product category PC21 Laboratory chemicals, Process category PROC1 Use in closed process, no likelihood of exposure, Environmental release category ERC7 Industrial use of substances in closed systems
Manufacturers & Suppliers
Becton Dickinson Biosciences Centralized European Office
manufacturer
Erembodegem-Dorp 86, 9320 Erembodegem, Belgium
Emergency Contacts
Becton Dickinson Biosciences Centralized European Office
+32 2 400 98 95
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
For the wording of the listed risk phrases refer to section 16.
Notes
Dangerous components: Void
First Aid Measures
Emergency procedures for chemical exposure incidents
Seek medical treatment in case of complaints.
Immediately wash with water and soap and rinse thoroughly.
Flush immediately with water for 15 minutes, and consult a doctor.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The usual precautionary measures are to be adhered to when handling chemicals.
No special measures required.
Damp down dust with water spray.
Materials: water spray
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special measures required.
Store in cool, dry conditions in well sealed receptacles.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Additional information about design of technical facilities: No further data; see item 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses
Not required.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No dangerous reactions known
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must be specially treated adhering to official regulations. After the product is used, disinfect with bleach (sodium hypochlorite), or an approved disinfectant, or incinerate, or autoclave at 121 C for at least 15 minutes before disposing.
Smaller quantities can be disposed of with household waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Void
- Shipping Name
- Void
- Transport Class
- Class Void
- Packing Group
- Void
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Risk phrases: R36/37/38 Irritating to eyes, respiratory system and skin. Safety phrases: S23 Do not breathe gas/fumes/vapour/spray. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S37 Wear suitable gloves. S60 This material and its container must be disposed of as hazardous waste.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BD™ Stem Cell Control?
The signal word is no signal word.
What is the physical form of BD™ Stem Cell Control?
BD™ Stem Cell Control is a liquid with dark red color. It has odourless odor.
What is BD™ Stem Cell Control used for?
Sector of Use SU24 Scientific research and development, Product category PC21 Laboratory chemicals, Process category PROC1 Use in closed process, no likelihood of exposure, Environmental release category ERC7 Industrial use of substances in closed systems
What is the melting point of BD™ Stem Cell Control?
The melting point is Not determined and the boiling point is Not determined.