Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Variant B-Thalassemia Short Elution Buffer 1
- Product Code
- 270-0004
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
In-vitro laboratory reagent or component
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Bio-Rad Laboratories S.A.-N.V.
manufacturer
Begoniastraat 5, B-9810 Nazareth-Eke, Belgium
Emergency Contacts
Bio-Rad Laboratories S.A.-N.V.
32-9-385-5511
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of the substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| water EC: 231-791-2 | 7732-18-5 | --- | No |
For the wording of the listed risk phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water.
Induce vomiting and call for medical help.
Medical Treatment
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Dilute with plenty of water.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special measures required.
According to product specification
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Additional information about design of technical systems: No further data; see item 7.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Protective gloves. Material of gloves: Synthetic gloves. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
This product contains sodium azide. Sodium azide can react with copper, brass, lead, and solder in piping systems to form explosive compounds of lead azide and copper azide.
No further relevant information available.
This product contains sodium azide. Sodium azide can react with copper, brass, lead, and solder in piping systems to form explosive compounds of lead azide and copper azide.
No dangerous decomposition products known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed of together with household garbage. Do not allow product to reach sewage system. Dispose of waste in accordance to applicable national, regional, or local regulations.
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Transport Class
- Void
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Variant B-Thalassemia Short Elution Buffer 1?
The signal word is no signal word.
What is the physical form of Variant B-Thalassemia Short Elution Buffer 1?
Variant B-Thalassemia Short Elution Buffer 1 is a fluid appearing as fluid, colourless with colourless color. It has odourless odor.
What is the solubility of Variant B-Thalassemia Short Elution Buffer 1?
Fully miscible
What is Variant B-Thalassemia Short Elution Buffer 1 used for?
In-vitro laboratory reagent or component
What is the melting point of Variant B-Thalassemia Short Elution Buffer 1?
The melting point is 0 °C and the boiling point is 100 °C.