Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DiaMed HbF Screening Test Elution Solution
- Product Code
- 05030
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
In vitro diagnostic medical device or component.
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
DiaMed GmbH
manufacturer
Pra Rond 23, CH-1785 Cressier FR, (Switzerland/Schweiz/Suisse/Swizzera)
+41 (0)26 674 51 11
Emergency Contacts
Emergency Contact
030-274 8888
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Immediate Medical Attention
Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions.
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unprotected persons away.
Dilute with plenty of water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
DiaMed HbF Screening Test Staining Solution
---
DiaMed HbF Screening Test Fixation Solution
---
HSH EDTA 15% Solution
---
Variant B-Thalassemia Short Elution Buffer 1
---
Selenium standard solution 1000 g/ml (Plasma HIQU)
---
Iron standard solution 1000 g/ml (Plasma HIQU)
---
EDTA Solution, 17%
---
Bio-Rad Protein Assay Dye Reagent Concentrate
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
Store in a cool location. Keep container tightly sealed. Store in cool, dry conditions in well sealed receptacles. Protect from heat and direct sunlight.
Keep ignition sources away - Do not smoke. Protect from heat. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Additional information about design of technical facilities: No further data; see item 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses. Tightly sealed goggles.
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2924
- Shipping Name
- FLAMMABLE LIQUID, CORROSIVE, N.O.S. (ETHANOL (ETHYL ALCOHOL), HYDROCHLORIC ACID)
- Transport Class
- 3
- Packing Group
- II
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DiaMed HbF Screening Test Elution Solution?
The signal word is danger.
What is the physical form of DiaMed HbF Screening Test Elution Solution?
DiaMed HbF Screening Test Elution Solution is a liquid with colourless color. It has alcohol-like odor.
What is DiaMed HbF Screening Test Elution Solution used for?
In vitro diagnostic medical device or component.
What are the hazard statements for DiaMed HbF Screening Test Elution Solution?
This substance has 2 hazard statements:
- H225: Highly flammable liquid and vapour.
- H314: Causes severe skin burns and eye damage.
What is the melting point of DiaMed HbF Screening Test Elution Solution?
The melting point is Undetermined. and the boiling point is 78 °C (ethanol).