Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CALCIUM CHLORIDE
- Product Form
- Mixture
- Product Code
- 0020008720
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For in vitro diagnostic use.
Uses advised against
Other uses are not expected
Manufacturers & Suppliers
Instrumentation Laboratory Co.
manufacturer
180 Hartwell Road, Bedford MA 01730-2443, USA
+1 800 678 0710
Werfen Australia pty Limited
distributor
59-61 Dickson Avenue, Artarmon NSW 2064, Australia
1300 369 132
Instrumentation Laboratory Co.
distributor
Via Leonardo da Vinci, 36, 20877 Roncello (MB) – Italy
Emergency Contacts
Emergency Contact
+44 (0) 3700 492 795
Emergency Contact
+1 215 207 0061
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
liquid containing organic and inorganic components, bovine source material.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Calcium chloride dihydrate EC: 233-140-8 | 10035-04-8 | 0.4% | Yes |
| Modified alkyl carboxilate | --- | 0.01% | Yes |
| Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) (CIT/MIT) (Note B) | 55965-84-9 | 0.005% | Yes |
Notes
Composition: liquid containing organic and inorganic components, bovine source material.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, move person to fresh air. If breathing is difficult, oxygen should be administered. Get medical advice if adverse symptoms appear.
Symptoms: allergy or asthma symptoms or breathing difficulties if inhaled.
Remove contaminated clothes and shoes. Wash immediately affected area with soap or mild detergent and plenty of water until the removal of the mixture (15-20 minutes). Get medical advice if adverse symptoms appear.
Symptoms: allergic skin reaction
Wash immediately with plenty of water or normal saline for at least 15 minutes. Keep eyelid open with the finger. Get medical advice if adverse symptoms appear.
If swallowed rinse mouth with plenty of water provided person is conscious. Do not induce vomiting. Get medical advice if adverse symptoms appear.
Immediate Medical Attention
Treat symptomatically.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2. Dry powder. Foam. Water spray.
Not known.
Water jets can be used successfully to cool containers exposed to the fire and disperse fumes.
Firefighter Protection
Self-contained breathing apparatus, flame and chemical resistant clothing, boots and gloves. Equipment must be conformed with the national/international standards and used in highest condition of protection on the basis of the information reported in the previous sub-sections.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No flames, no sparks. Eliminate all sources of ignition. Ventilate spillage area. Evacuate area.
Harmful to aquatic life with long lasting effects. Do not let the product enter drainage system, surface and ground-water or soil.
Collect spilled material in containers. Where appropriate, moisten to prevent the dispersion of dust, absorb with inert materials and wash the area with plenty of water.
Materials: inert materials
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in a well ventilated place, and away from sparks and flames - sources of ignition. Keep the mixture away from drains, surface or ground waters. Avoid contact with incompatible materials. Wear suitable Personal Protection Equipment (see section 8).
Keep containers tightly closed and labelled with the name of the product. Avoid environmental release. Keep away from food and drinks.
Do not eat, drink or smoke when using this product. Always wash hands after handling the product. Remove contaminated clothing and personal protective equipments (PPE) before entering eating areas.
Keep away from sparks and flames - sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Appropriate risk management measures, that must be adopted at the workplace, have to be selected and applied, following the risks assessment carried out by the employer, in connection with his working activity. If the results of this evaluation show that the general and collective prevention measures are not sufficient to reduce the risk, and if you cannot prevent exposure to the mixture by other means, adequate personal protective equipment must be adopted, complying with the relevant technical national/international standards.
protective gloves
Safety glasses
Respiratory protection is not required. Where risk assessment shows air-purifying respirators are appropriate, use masks with approved filter. Use only devices approved by the Competent Authorities such as NIOSH (USA) and CEN (EU).
Protective clothing, rubber gloves.
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable until the expiration date shown on the box and on the labels when stored at 2 – 8 °C.
This mixture is considered not reactive under the normal conditions of the usage.
Under normal conditions of storage and use, hazardous reactions will not occur.
Keep away from heat and light.
Strong oxidizing agents.
Thermal decomposition or combustion may generate toxic and hazardous fumes of COx, NOx, SOx, HF, HCl.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Used waste product, surplus product or spillage products shall be disposed of in accordance with national, state and local laws.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CALCIUM CHLORIDE?
The signal word is warning.
What is the physical form of CALCIUM CHLORIDE?
CALCIUM CHLORIDE is a liquid appearing as clear. liquid. with colourless. color. It has not available odor.
What is the solubility of CALCIUM CHLORIDE?
Water: Miscible
What is CALCIUM CHLORIDE used for?
For in vitro diagnostic use.
What are the hazard statements for CALCIUM CHLORIDE?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of CALCIUM CHLORIDE?
The melting point is Not available and the boiling point is Not available.