Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CALCIUM CHLORIDE, HYDRATED
- Product Code
- 10070
- Chemical Name
- calcium chloride, hydrated
- Synonyms
- CaCl2, xH2O, cal plus replenisher (calcium), calcium chloride (all grades), calcium chloride dihydrate, calcium chloride dihydrate (CAS RN: 10035-04-8), calcium chloride hexahydrate (CAS RN:7774-34-7), calcium chloride monohydrate, calcium chloride tetrahydrate
Regulatory Identifiers
- CAS Number
- 10035-04-8 Check regulations →
Identified Uses
The dihydrate and hexahydrate forms are used for antifreeze and refrigerant brine solutions. Used for dust control on unpaved roads. Accelerator additive for quicker set and greater strength in concrete mix. De-icing fluid to melt ice and snow; freeze proofing of coal and ores. A 2.5% solution is iso-tonic with serum.
Manufacturers & Suppliers
Bio-Strategy Pty Ltd
distributor
Unit 1A/60 Enterprise Place QLD 4173 Australia
1300 727 696
http://www.bio-strategy.com.au
Emergency Contacts
Emergency Contact
07 3009 4188
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| calcium chloride, hydrated | 10035-04-8 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If fumes or combustion products are inhaled remove from contaminated area. Lay patient down. Keep warm and rested. Prostheses such as false teeth, which may block airway, should be removed, where possible, prior to initiating first aid procedures. Apply artificial respiration if not breathing, preferably with a demand valve resuscitator, bag-valve mask device, or pocket mask as trained. Perform CPR if necessary. Transport to hospital, or doctor, without delay.
Immediately remove all contaminated clothing, including footwear. Flush skin and hair with running water (and soap if available). Seek medical attention in event of irritation.
Wash out immediately with fresh running water. Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids. Seek medical attention without delay; if pain persists or recurs seek medical attention. Removal of contact lenses after an eye injury should only be undertaken by skilled personnel.
IF SWALLOWED, REFER FOR MEDICAL ATTENTION, WHERE POSSIBLE, WITHOUT DELAY. For advice, contact a Poisons Information Centre or a doctor. Urgent hospital treatment is likely to be needed. In the mean time, qualified first-aid personnel should treat the patient following observation and employing supportive measures as indicated by the patient's condition. If the services of a medical officer or medical doctor are readily available, the patient should be placed in his/her care and a copy of the SDS should be provided. Further action will be the responsibility of the medical specialist. If medical attention is not available on the worksite or surroundings send the patient to a hospital together with a copy of the SDS. Where medical attention is not immediately available or where the patient is more than 15 minutes from a hospital or unless instructed otherwise: INDUCE vomiting with fingers down the back of the throat, ONLY IF CONSCIOUS. Lean patient forward or place on left side (head-down position, if possible) to maintain open airway and prevent aspiration.
Immediate Medical Attention
Seek medical attention without delay; if pain persists or recurs seek medical attention. Transport to hospital, or doctor, without delay. IF SWALLOWED, REFER FOR MEDICAL ATTENTION, WHERE POSSIBLE, WITHOUT DELAY.
Medical Treatment
As in all cases of suspected poisoning, follow the ABCDEs of emergency medicine (airway, breathing, circulation, disability, exposure), then the ABCDEs of toxicology (antidotes, basics, change absorption, change distribution, change elimination). For poisons (where specific treatment regime is absent): BASIC TREATMENT: Establish a patent airway with suction where necessary. Watch for signs of respiratory insufficiency and assist ventilation as necessary. Administer oxygen by non-rebreather mask at 10 to 15 L/min. Monitor and treat, where necessary, for pulmonary oedema. Monitor and treat, where necessary, for shock. Anticipate seizures. Where ingestion is suspected rinse mouth and give up to 200 ml water (5 ml/kg recommended) for dilution where patient is able to swallow, has a strong gag reflex and does not drool. ADVANCED TREATMENT: Consider orotracheal or nasotracheal intubation for airway control in unconscious patient or where respiratory arrest has occurred. Positive-pressure ventilation using a bag-valve mask might be of use. Monitor and treat, where necessary, for arrhythmias. Start an IV DSW TKO. If signs of hypovolaemia are present use lactated Ringers solution. Fluid overload might create complications. Drug therapy should be considered for pulmonary oedema. Hypotension with signs of hypovolaemia requires the cautious administration of fluids. Fluid overload might create complications. Treat seizures with diazepam. Proparacaine hydrochloride should be used to assist eye irrigation. Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
There is no restriction on the type of extinguisher which may be used. Use extinguishing media suitable for surrounding area.
Non combustible. Not considered a significant fire risk, however containers may burn.
Alert Fire Brigade and tell them location and nature of hazard. Prevent, by any means available, spillage from entering drains or water courses. Use fire fighting procedures suitable for surrounding area.
Firefighter Protection
Wear breathing apparatus plus protective gloves in the event of a fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
See section 8
- Remove all ignition sources. - Clean up all spills immediately. - Avoid contact with skin and eyes. - Control personal contact with the substance, by using protective equipment.
- Moderate hazard. - CAUTION: Advise personnel in area. - Alert Emergency Services and tell them location and nature of hazard. - Control personal contact by wearing protective clothing.
See section 12
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid all personal contact, including inhalation. Wear protective clothing when risk of exposure occurs. Use in a well-ventilated area. Prevent concentration in hollows and sumps.
Store in original containers. Keep containers securely sealed. Store in a cool, dry area protected from environmental extremes. Store away from incompatible materials and foodstuff containers.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Unstable in the presence of incompatible materials. Product is considered stable. Hazardous polymerisation will not occur.
See section 7
See section 7
See section 7
See section 7
See section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is CALCIUM CHLORIDE, HYDRATED known by?
CALCIUM CHLORIDE, HYDRATED is also known as: CaCl2, xH2O, cal plus replenisher (calcium), calcium chloride (all grades), calcium chloride dihydrate, calcium chloride dihydrate (CAS RN: 10035-04-8), calcium chloride hexahydrate (CAS RN:7774-34-7), calcium chloride monohydrate, calcium chloride tetrahydrate
What is the hazard signal word for CALCIUM CHLORIDE, HYDRATED?
The signal word is warning.
What is the physical form of CALCIUM CHLORIDE, HYDRATED?
CALCIUM CHLORIDE, HYDRATED is a divided solid appearing as white, deliquescent crystals. no odour. soluble in water (with heat liberation) and alcohol. available as mono-, di-, tetra- and hexahydrates. . It has not available odor.
What is CALCIUM CHLORIDE, HYDRATED used for?
The dihydrate and hexahydrate forms are used for antifreeze and refrigerant brine solutions. Used for dust control on unpaved roads. Accelerator additive for quicker set and greater strength in concrete mix. De-icing fluid to melt ice and snow; freeze proofing of coal and ores. A 2.5% solution is iso-tonic with serum.
What are the hazard statements for CALCIUM CHLORIDE, HYDRATED?
This substance has 4 hazard statements:
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
What is the melting point of CALCIUM CHLORIDE, HYDRATED?
The melting point is 260 °C (dihydrate) and the boiling point is >1600 °C.