Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Compressed Gas, containing <= 21 Vol.-% Oxygen, Carbon dioxide, balance Nitrogen
- Product Code
- SDB 2.010_E
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Riessner Gase GmbH & Co. KG
manufacturer
Rudolf-Diesel Strasse 5, 96215 Lichtenfels GERMANY
00 49 9 571 7650
Emergency Contacts
Emergency Contact
00 49 9 571 765 43
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Not hazardous.
No effect on living tissue.
No effect on living tissue.
Ingestion is not considered a potential route of exposure.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All known extinguishants can be used.
Exposure to fire may cause containers to rupture/explode. Supports combustion.
If possible, stop flow of product. Move away from the container and cool with water from a protected position.
Firefighter Protection
None.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Nonflammable Gas Mixture: Carbon Dioxide / Nitrogen / Oxygen
---
NON-FLAMMABLE GAS MIXTURE Containing One or More of the Following Components in a Nitrogen Balance Gas: Carbon Monoxide, 0.0005 – 1.0%; Hydrogen, 0 – 2.0%; Methane, 0 – 2.5%; Oxygen, 0 – 23.5%
---
Nitrogen, compressed
CAS: 7727-37-9
Nitrogen, compressed.
CAS: 7727-37-9
Nitrogen, compressed.
CAS: 7727-37-9
Oxygen, compressed
CAS: 7782-44-7
Carbon Dioxide (0.0001%-2.9999%), Oxygen (0.0001%-19.4900%) in Nitrogen
---
NITROGEN, COMPRESSED
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Open valve slowly to avoid pressure shock. Suck back of water into the container must be prevented. Do not allow backfeed into the container. Use only properly specified equipment which is suitable for this product, its supply pressure and temperature. Contact your gas supplier if in doubt. Refer to supplier's container handling instructions.
Keep container below 50°C in a well ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Consult supplier for specific recommendations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1956
- Shipping Name
- COMPRESSED GAS, N.O.S. (Nitrogen, Oxygen)
- Transport Class
- 2
Avoid transport on vehicles where the load space is not separated from the driver's compartment. Ensure vehicle driver is aware of the potential hazards of the load and knows what to do in the event of an accident or an emergency. Before transporting product containers: Ensure that containers are firmly secured. Ensure cylinder valve is closed and not leaking. Ensure valve outlet cap nut or plug (where provided) is correctly fitted. Ensure valve protection device (where provided) is correctly fitted. Ensure there is adequate ventilation. Compliance with applicable regulations.
Avoid transport on vehicles where the load space is not separated from the driver's compartment. Ensure vehicle driver is aware of the potential hazards of the load and knows what to do in the event of an accident or an emergency. Before transporting product containers: Ensure that containers are firmly secured. Ensure cylinder valve is closed and not leaking. Ensure valve outlet cap nut or plug (where provided) is correctly fitted. Ensure valve protection device (where provided) is correctly fitted. Ensure there is adequate ventilation. Compliance with applicable regulations.
Avoid transport on vehicles where the load space is not separated from the driver's compartment. Ensure vehicle driver is aware of the potential hazards of the load and knows what to do in the event of an accident or an emergency. Before transporting product containers: Ensure that containers are firmly secured. Ensure cylinder valve is closed and not leaking. Ensure valve outlet cap nut or plug (where provided) is correctly fitted. Ensure valve protection device (where provided) is correctly fitted. Ensure there is adequate ventilation. Compliance with applicable regulations.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Not classified as dangerous preparation/substance.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Compressed Gas, containing <= 21 Vol.-% Oxygen, Carbon dioxide, balance Nitrogen?
The signal word is no signal word.
What is the physical form of Compressed Gas, containing <= 21 Vol.-% Oxygen, Carbon dioxide, balance Nitrogen?
Compressed Gas, containing <= 21 Vol.-% Oxygen, Carbon dioxide, balance Nitrogen is a compressed gas. with colourless. color. It has odourless. odor.
What are the hazard statements for Compressed Gas, containing <= 21 Vol.-% Oxygen, Carbon dioxide, balance Nitrogen?
This substance has 1 hazard statement:
- Compressed gas.