NextSDS Logo
Safety Data Sheet EN

DuoSet Ancillary Reagent Kit 3, 5 Plate

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
DuoSet Ancillary Reagent Kit 3, 5 Plate
Product Code
DY009

Regulatory Identifiers

CAS Number
N/A

Identified Uses

For Research Use Only

Manufacturers & Suppliers

R

R&D Systems Inc.

manufacturer

614 McKinley Place N.E., Minneapolis, MN 55413 USA

1-800-343-7475

R

R&D Systems Inc.

manufacturer

614 McKinley Place N.E., Minneapolis, MN 55413 USA

+44(0)1235-529449

Emergency Contacts

CHEMTREC

1-800-424-9300

CHEMTREC

+1 703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H319 Causes serious eye irritation.

Precautionary Statements

P264 Wash hands thoroughly after handling.
P280 Wear protective gloves, clothing and eye and face protection.
P301 + P312 IF SWALLOWED: Call a POISON CENTER or physician if you feel unwell. Rinse mouth.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical attention.
P362 + P364 IF ON SKIN (or hair): Immediately remove contaminated clothing and wash before re-use. Wash skin immediately with soap and water. Get medical attention if irritation persists after washing.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Sulfuric Acid, Formula: H 2 SO 4. Contains Water ~90.2% Sulfuric Acid ~ 9.8%

Chemical Name CAS Number Concentration Hazardous
Water EC: 231-791-2 7732-18-5 90.2% No
Sulfuric Acid EC: 231-639-5 7664-93-9 9.8% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

Symptoms: Harmful if inhaled. Exposure to decomposition products may cause a health hazard. Serious effects may be delayed following exposure.

Skin contact

Immediately take off contaminated clothing or shoes. Wash with plenty of soap and water. Consult a physician.

Symptoms: Causes skin irritation / causes burns

Eye contact

Rinse thoroughly with water for at least 15 minutes and immediately consult a physician.

Symptoms: Causes serious eye irritation / causes burns

Ingestion

Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Immediately consult a physician.

Symptoms: Harmful if swallowed. Irritating to mouth, throat and stomach. / Causes burns

Immediate Medical Attention

Immediately consult a physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Specific hazards

In case of fire, toxic and corrosive gases may be formed.

Firefighter Protection

Self contained breathing apparatus and full protective clothing must we worn in case of fire.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Keep away from drains.

Cleanup methods

Soak up with inert absorbent material

Materials: inert absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid inhalation of vapour or mist. Use normal measures for preventive fire protection.

Storage

Store in a cool, dry place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.

Fire prevention

Use normal measures for preventive fire protection.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use with adequate ventilation including local extraction. Ensure that eyewash stations and safety showers are close to the workstation location.

Hands

Handle with protective gloves, plastic or rubber. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.

Eyes

Wear approved safety goggles.

Respiratory

In case of inadequate ventilation, use a suitable respirator. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Skin/Body

Wear suitable protective clothing as protection against splashing or contamination. Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Ph
~1
Flammability
Not available
Solubility In Water
Soluble
Upper Explosive Limit
Not available
Molecular Weight
---
Solidification Point
---
Metal Corrosion
---
Melting Point
Not available
Colour
Colorless
Physical State Data
liquid
Density
---
Relative Density
Not available
Cloud Point
---
Odor
pungent
Vapor Pressure
Not available
Properties Status
---
Boiling Point
Not available
Odor Threshold
Not available
Decomposition Temperature
Not available
Flash Point
Not available
Voc Content
---
Explosive Limits
---
Lower Explosive Limit
Not available
Auto Ignition Temperature
Not available
Crystallisation Point
---
Softening Point
---
Relative Evaporation Rate
---
Bulk Density
---
Vapor Density
Not available
Kinematic Viscosity
---
Physical State
Colorless Liquid
Solubility
---
State Under Standard Conditions
---
Colour Intensity
---
Evaporation Rate
Not available
Partition Coefficient
Not available
Form
Liquid
Solubility In Fat
---
Dynamic Viscosity
---
Appearance
Colorless Liquid
Freezing Point
Not available
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

Contact with metals produces highly flammable hydrogen gas. Addition of water liberates excessive heat..

Hazardous reactions

Under normal conditions of storage and use, hazardous reactions will not occur.

Avoid

Bases, Halides, Metals, Alkalis, Acetonitrile.

Incompatible

Most metals, oxidizers, reducers, bases, metal carbonates, cyanides, sulphides, carbides, oxides, metal acetylides, hydrides, halogens, organic or combustible materials, perchlorates, acetonitrile, permanganates, alcohols, picrates.

Decomposition

Products formed under fire conditions: Oxides of Sulphur, Hydrogen gas.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Dispose of waste in accordance to applicable national, regional, or local regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN 2796
Shipping Name
Sulphuric Acid
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for DuoSet Ancillary Reagent Kit 3, 5 Plate?

The signal word is warning.

What is the physical form of DuoSet Ancillary Reagent Kit 3, 5 Plate?

DuoSet Ancillary Reagent Kit 3, 5 Plate is a colorless liquid appearing as colorless liquid with colorless color. It has pungent odor.

What is DuoSet Ancillary Reagent Kit 3, 5 Plate used for?

For Research Use Only

What are the hazard statements for DuoSet Ancillary Reagent Kit 3, 5 Plate?

This substance has 2 hazard statements:

  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.

What is the melting point of DuoSet Ancillary Reagent Kit 3, 5 Plate?

The melting point is Not available and the boiling point is Not available.