AMH Gen II Assay Buffer Kit

If product is inhaled, move exposed individual to fresh air. If individual is not breathing, begin artificial respiration immediately and obtain medical attention.

In case of skin contact, flush with copious amounts of water for at least 15 minutes. Remove contaminated clothing and shoes. If pain or irritation occur, obtain medical attention.

If product enters eyes, wash eyes gently under running water for 15 minutes or longer, making sure that the eyelids are held open. If pain or irritation occur, obtain medical attention.

If ingested, wash mouth out with water. If irritation or discomfort occurs, seek medical attention.

In case of fire use carbon dioxide (CO2), dry chemical, water spray or foam. For large fires use extinguishing media suitable for surrounding fire.

No special hazards determined.

Observe general safety guidelines for protection during clean up procedures.

Contain spill to prevent migration.

As a precautionary measure, treat spilled material with a 1:10 bleach/water solution. Absorb liquid and place in container suitable for disposal. Avoid generation of aerosols during clean up.

This product should be handled as though capable of transmitting infectious diseases. Universal precautions should be followed when using this product.

Store at 2 to 8°C, as directed on the product label. To maintain product quality, store according to the instructions in the product labeling.

No special engineering controls are required. Use with good general ventilation.

Impervious gloves, such as Nitrile or equivalent, should be worn to prevent skin contact. Refer U.S. OSHA 29 CFR 1910.138, European Standard EN374 or appropriate government standards.

Safety glasses or chemical goggles should be worn to prevent eye contact. Refer U.S. OSHA 29 CFR 1910.133, European Standard EN166 or appropriate government standards.

Under normal conditions, the use of this product should not require respiratory protection. If overexposure should occur and ventilation is not adequate to maintain airborne concentrations at acceptable levels, the use of respiratory protection should be evaluated by a qualified professional.

The product is stable in accordance with recommended storage conditions.

No further relevant information available.

Sodium azide forms explosive compounds with heavy metals. Repeated contact of low concentrations of azide with lead and copper commonly found in plumbing drains may result in the build up of shock sensitive compounds.

Avoid contact with incompatible materials. Avoid exposure to heat and direct sunlight.

Metals and metallic compounds

No decomposition products posing significant hazards would be expected from this product (an aqueous solution).

Chemical residues and remains should be routinely handled as special waste. This must be disposed of in compliance with anti-pollution and other laws of the country concerned.

Dispose of as potentially biohazardous waste and in compliance with anti-pollution and other laws of the country concerned.