NextSDS Logo
Di

Direct-zol RNA PreWash

DANGER SDS/MSDS
Chemical Identity

Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Direct-zol RNA PreWash
Product Code
R2050-2-160

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
Laboratory Reagent

Overview

Direct-zol RNA PreWash commonly used laboratory reagent.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

Safety Classification

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Flam. Liq. Category 2 H225
Skin Irrit. Category 2 H315
Eye Irrit. Category 2A H319

GHS Hazard Pictograms & Safety Symbols

GHS02 GHS Hazard Pictogram: Flammable hazard - Fire risk materials including gases, liquids, and solids

GHS02

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H225: Highly flammable liquid and vapor.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.

Precautionary Statements

  • Keep away from heat/sparks/open flames/hot surfaces. No smoking.
  • Use explosion-proof electrical/ventilating/lighting/equipment.
  • Wear protective gloves / eye protection / face protection.
  • Ground/bond container and receiving equipment.
  • Keep container tightly closed.
  • Use only non-sparking tools.
  • Take precautionary measures against static discharge.
  • Wash thoroughly after handling.
  • If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
  • If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • Specific treatment (see on this label).
  • If skin irritation occurs: Get medical advice/attention.
  • If eye irritation persists: Get medical advice/attention.
  • In case of fire: Use for extinction: CO2, powder or water spray.
  • Take off contaminated clothing and wash it before reuse.
  • Store in a well-ventilated place. Keep cool.
  • Dispose of contents/container in accordance with local/regional/national/international regulations.
Supply Chain

Manufacturers & Suppliers

Authorized suppliers, manufacturers, and distribution network information

Zymo Research Corp.

manufacturer

17062 Murphy Ave. Irvine, CA 92614 USA

US

1-949-679-1190 or 1-888-882-9682

Emergency

24/7 Emergency Response

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

+1 (949) 679 1190

US

During normal business hours (8 am to 5 pm Pacific Standard Time)

Composition

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

Mixtures

General Composition

Mixture of the substances listed below with nonhazardous additions.

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
Trade Secret N/A 20% Hazardous
Trade Secret N/A 70% Hazardous
First Aid

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

Inhalation Exposure

Supply fresh air; consult doctor in case of complaints.

Eye Contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion/Swallowing

Do not induce vomiting; immediately call for medical help.

Immediate Medical Attention Required

Immediately call for medical help after swallowing.

Alternatives

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Section 9

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

Physical State
Not available
Physical State Data
liquid
State Under Standard Conditions
Not available
Appearance
Not available
Colour
Colorless
Colour Intensity
Not available
Form
Fluid
Odor
Characteristic
Odor Threshold
Not determined.
Ph
Not determined.
Melting Point
Undetermined.
Critical Property
Boiling Point
Undetermined.
Critical Property
Flash Point
<30 C (<86 F)
Critical Property
Freezing Point
Not available
Softening Point
Not available
Solidification Point
Not available
Cloud Point
Not available
Crystallisation Point
Not available
Relative Evaporation Rate
Not available
Evaporation Rate
Not determined.
Vapor Pressure
59 hPa (44 mm Hg)
Vapor Density
Not determined.
Relative Density
Not determined.
Bulk Density
Not available
Density
Not determined.
Critical Property
Flammability
Not applicable.
Upper Explosive Limit
15.0 Vol %
Lower Explosive Limit
3.5 Vol %
Explosive Limits
Not available
Auto Ignition Temperature
425 C (797 F)
Decomposition Temperature
Not determined.
Solubility
Not available
Partition Coefficient
Not determined.
Solubility In Water
Fully miscible.
Solubility In Fat
Not available
Molecular Weight
Not available
Voc Content
69.0 %
Metal Corrosion
Not available
Dynamic Viscosity
Not determined.
Kinematic Viscosity
Not determined.
Properties Status
Not available
Section 8

Exposure Controls & Personal Protective Equipment

Occupational exposure limits, engineering controls, and required safety equipment

Engineering Controls

No further data; see item 7.

Hand Protection

The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Eye Protection

Tightly sealed goggles

Respiratory Protection

Not required.

Section 14

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

UN Number

UN1170

Proper Shipping Name

ETHANOL MIXTURE

Transport Hazard Class

3 Flammable liquids

Packing Group

III

IMDG Maritime Transport Precautions

Warning: Flammable liquids

IATA Air Transport Precautions

Warning: Flammable liquids

FAQ

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for Direct-zol RNA PreWash?

The signal word for this substance is "danger".

What is Direct-zol RNA PreWash used for?

Laboratory Reagent

What are the hazard statements for Direct-zol RNA PreWash?

This substance has 3 hazard statements: H225: Highly flammable liquid and vapor. H315: Causes skin irritation. H319: Causes serious eye irritation.

What is the melting point of Direct-zol RNA PreWash?

The melting point is Undetermined. and the boiling point is Undetermined..