Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DNA Pre-Wash Buffer
- Product Code
- D3004-5-S, D3004-5-15, D3004-5-30, D3004-5-50, D3004-5-250
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory Reagent
Manufacturers & Suppliers
Zymo Research Corp.
manufacturer
17062 Murphy Ave., Irvine, CA 92614, U.S.A.
+1(949) 679-1190
Emergency Contacts
Emergency Contact
+1 (949) 679 1190
8 am to 5 pm Pacific Standard Time
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor. Wash eyes immediately, for at least 15 minutes, with large amounts of water, holding upper and lower lids open. Remove contact lenses, if present and it is easy to do so. Get medical attention immediately.
Do not induce vomiting; immediately call for medical help. Immediately call a doctor. Drink copious amounts of water and provide fresh air. Immediately call a doctor.
Immediate Medical Attention
Get medical attention immediately (for eye contact); immediately call for medical help (for ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Firefighter Protection
Wear protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Dilute with plenty of water.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
Store in a cool location. Keep receptacle tightly sealed. Store in cool, dry conditions in well sealed receptacles.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1219
- Shipping Name
- ISOPROPANOL (ISOPROPYL ALCOHOL) mixture
- Transport Class
- 3
- Packing Group
- II
Warning: Flammable liquids
Warning: Flammable liquids
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DNA Pre-Wash Buffer?
The signal word is danger.
What is the physical form of DNA Pre-Wash Buffer?
DNA Pre-Wash Buffer is a liquid appearing as clear with clear color. It has alcohol-like odor.
What is DNA Pre-Wash Buffer used for?
Laboratory Reagent
What are the hazard statements for DNA Pre-Wash Buffer?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapor.
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of DNA Pre-Wash Buffer?
The melting point is Undetermined. and the boiling point is >80 °C (>176 °F).