Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Tuning Mix 2
- Product Code
- 96016
- Synonyms
- MassTox® Drugs of Abuse Testing in urine
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
In vitro diagnostics, PC21 Laboratory chemicals, PROC15 Use as laboratory reagent
Manufacturers & Suppliers
Chromsystems Instruments & Chemicals GmbH
manufacturer
Am Haag 12, 82166 Gräfelfing, Germany
+49 89 18930-0
http://www.chromsystems.com
Emergency Contacts
Emergency poison number
+49 89 19240
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. Provide oxygen treatment if affected person has difficulty breathing. In case of irregular breathing or respiratory arrest provide artificial respiration. Use a respiratory bag or breathing device. Seek medical treatment.
Symptoms: Breathing difficulty, Headache, Spasms, Dizziness, Unconsciousness, Nausea
Immediately rinse with plenty of water. Seek medical treatment.
Symptoms: Irritation
Rinse opened eye for several minutes under running water. Then consult a doctor.
Symptoms: Irritation
Rinse out mouth and then drink plenty of water. Seek medical treatment.
Symptoms: Nausea
Immediate Medical Attention
Seek medical treatment. Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
Medical Treatment
Seek medical treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Fire-extinguishing powder, Carbon dioxide, Foam
Nitrogen oxides (NOx), Hydrogen cyanide (HCN)
Cool endangered receptacles with water spray.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Wear protective equipment. Keep unprotected persons away. Keep away from ignition sources.
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, universal binders
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Ensure good interior ventilation, especially at floor level. (Fumes are heavier than air). Keep receptacles tightly sealed.
Store only in the original receptacle. Store receptacle in a well ventilated area. Store below -18°C. Keep container tightly sealed. Protect from heat and direct sunlight.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Protective gloves. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374. For the permanent contact gloves made of the following materials are suitable: Butyl rubber, BR, Recommended thickness of the material: ≥ 0.7 mm, Penetration time: > 480 min. As protection from splashes gloves made of the following materials are suitable: Polychloroprene, Recommended thickness of the material: ≥ 0.65 mm, Penetration time: > 30 min.
Tightly sealed goggles
Use suitable respiratory protective device when high concentrations are present. Filter A
Light weight protective clothing
Do not empty into drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
Fumes may form an explosive mixture with air.
Forms explosive gas mixture with air. Reacts with acids. Reacts with oxidising agents.
Heating.
Various plastics, rubber.
Nitrogen oxides (NOx), Hydrogen cyanide (prussic acid)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Product residues are to be disposed of in compliance with Directive 2008/98/EC on Waste and national and local requirements, e.g. in a suitable incineration plant.
Leave chemicals in original containers. Transfer small quantities to approved transport containers. Protect collection receptacles and containers from access by unauthorized parties. Must not be disposed together with domestic waste. Do not circulate into the main water supply.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1648
- Shipping Name
- ACETONITRILE solution
- Transport Class
- 3
- Packing Group
- II
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No further relevant information available.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Tuning Mix 2 known by?
Tuning Mix 2 is also known as: MassTox® Drugs of Abuse Testing in urine
What is the hazard signal word for Tuning Mix 2?
The signal word is danger.
What is the physical form of Tuning Mix 2?
Tuning Mix 2 is a fluid with colourless color. It has characteristic odor.
What is Tuning Mix 2 used for?
In vitro diagnostics, PC21 Laboratory chemicals, PROC15 Use as laboratory reagent
What are the hazard statements for Tuning Mix 2?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapour.
- H302 + H312 + H332: Harmful if swallowed, in contact with skin or if inhaled.
- H319: Causes serious eye irritation.
What is the melting point of Tuning Mix 2?
The melting point is Undetermined. and the boiling point is > 35 °C.