Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Tuning Mix 3 commonly used in vitro diagnostics.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H225: Highly flammable liquid and vapour.
- H302 + H312 + H332: Harmful if swallowed, in contact with skin or if inhaled.
- H319: Causes serious eye irritation.
Precautionary Statements
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P241: Use explosion-proof [electrical/ventilating/lighting] equipment.
- P243: Take action to prevent static discharges.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Chromsystems Instruments & Chemicals GmbH
manufacturer
Am Haag 12 82166 Grfelfing Germany
DE
+49 89 18930-0
+49 89 18930-299
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency poison number
+49 89 19240
DE
Languages: DE, EN
advisory service in German and English
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Mixture of substances listed below with nonhazardous additions.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| cyaanmethaan EC: 200-835-2 | 75-05-8 | 50-100% | ⚠️ Hazardous |
| Methanol EC: 200-659-6 | 67-56-1 | 2.5% | ⚠️ Hazardous |
Additional Information
For the wording of the listed hazard phrases refer to section 16.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Supply fresh air. Provide oxygen treatment if affected person has difficulty breathing. In case of irregular breathing or respiratory arrest provide artificial respiration. Use a respiratory bag or breathing device. Seek medical treatment.
Symptoms:
Breathing difficulty, Headache, Spasms, Dizziness, Unconsciousness, Nausea, Irritation. The following applies to cyanogen compounds/nitriles in general: utmost caution! Release of hydrocyanic acid is possible- blockade of cellular respiration. Cardiovascular disorders, dyspnoea, unconsciousness.
🖐️ Skin Contact
Immediately rinse with plenty of water. Seek medical treatment.
👁️ Eye Contact
Rinse opened eye for several minutes under running water. Then consult a doctor.
🍽️ Ingestion/Swallowing
Rinse out mouth and then drink plenty of water. Seek medical treatment.
🚨 Immediate Medical Attention Required
No further relevant information available.
Medical Treatment
Provide oxygen treatment if affected person has difficulty breathing. In case of irregular breathing or respiratory arrest provide artificial respiration. Use a respiratory bag or breathing device.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
No further data; see section 7.
🧤 Hand Protection
Protective gloves. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374. For the permanent contact gloves made of the following materials are suitable: Butyl rubber, BR. Recommended thickness of the material: 0.7 mm. Penetration time: > 480 min. As protection from splashes gloves made of the following materials are suitable: Polychloroprene. Recommended thickness of the material: 0.65 mm. Penetration time: > 30 min.
👁️ Eye Protection
Tightly sealed goggles
😷 Respiratory Protection
Use suitable respiratory protective device when high concentrations are present. Filter A
🦺 Skin/Body Protection
Light weight protective clothing
🌍 Environmental Exposure Controls
Do not empty into drains.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1648
📦 Proper Shipping Name
ACETONITRILE solution
⚠️ Transport Hazard Class
3 Flammable liquids.
📋 Packing Group
II
🚛 ADR Transport Precautions
Warning: Flammable liquids.
🚢 IMDG Maritime Transport Precautions
Warning: Flammable liquids.
✈️ IATA Air Transport Precautions
Warning: Flammable liquids.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Tuning Mix 3?
The signal word for this substance is "danger".
What is Tuning Mix 3 used for?
In vitro diagnostics
What are the hazard statements for Tuning Mix 3?
This substance has 3 hazard statements: H225: Highly flammable liquid and vapour. H302 + H312 + H332: Harmful if swallowed, in contact with skin or if inhaled. H319: Causes serious eye irritation.
What is the melting point of Tuning Mix 3?
The melting point is Undetermined. and the boiling point is 35 C.