Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 5-MAPB hydrochloride, Renstoff
- Product Code
- C10886.12
Regulatory Identifiers
- CAS Number
- 1823925-53-6 Check regulations →
Identified Uses
Laboratory use, Restricted to professional users.
Uses advised against
None known.
Manufacturers & Suppliers
Chiron AS
manufacturer
Stiklestadveien 1, N-7041 TRONDHEIM
Emergency Contacts
poison information centre
113
24h service
Poison Center
+47 22 59 13 00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 5-MAPB hydrochloride | 1823925-53-6 | 100% | Yes |
Notes
See full text of H-phrases in section 16. Occupational exposure limits are listed in section 8, if these are available.
First Aid Measures
Emergency procedures for chemical exposure incidents
Upon breathing difficulties or irritation of the respiratory tract: Bring the person into fresh air and stay with him/her.
IF ON SKIN: Wash with plenty of water and soap. Remove contaminated clothing and shoes. Ensure to wash exposed skin thoroughly with water and soap. DO NOT use solvents or thinners. If skin irritation occurs: Get medical advice/attention.
If in eyes: Flush eyes immediately with plenty of water or isotonic water (20-30 °C) for at least 5 minutes and continue until irritation stops. Remove contact lenses. Make sure to flush under upper and lower eyelids. If irritation continues, contact a doctor. Continue flushing during transport.
In the case of ingestion, contact a doctor immediately. If the person is conscious, give them water. DO NOT try to induce vomiting unless this is recommended by a doctor. Hold head facing down to prevent vomit from returning to the mouth and throat. Prevent shock by keeping the injured person warm and calm. Initiate immediate resuscitation if breathing stops. If unconscious, roll the injured person into recovery position. Call an ambulance.
Immediate Medical Attention
In the case of ingestion, contact a doctor immediately. If eye irritation persists: Get medical advice/attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, carbon dioxide, powder, water mist.
Waterjets should not be used, since they can spread the fire.
Fire will result in dense smoke. Exposure to combustion products may harm your health.
Closed containers, which are exposed to fire, should be cooled with water.
Firefighter Protection
Wear self-contained breathing apparatus and protective clothing to prevent contact.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid direct contact with spilled substances. Ensure adequate ventilation, especially in confined areas. Contaminated areas may be slippery.
Minor spills are collected with a cloth.
Avoid discharge to lakes, streams, sewers, etc. Keep unauthorized persons away from the spill
Sweep and collect.
Related Products
Similar products with comparable safety profiles
4-Methoxyphencyclidine hydrochloride, Renstoff
CAS: 2185-93-5
5-Ethyl-2-methylpyridine
---
3-Methylmethcathinone Hydrochloride, neat
CAS: 1246816-62-5
2-Methoxy-5-methylaniline
CAS: 120-71-8
3-Ethoxy-2-pyridinamine
CAS: 10006-74-3
4-Methyl-2-pentanone AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent
CAS: 108-10-1
5-Nitroacenaphthene
CAS: 602-87-9
Fenpyrazamine, technical grade
CAS: 473798-59-3
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
See section 8 "Exposure controls/personal protection" for information on personal protection.
No special conditions required.
Smoking, drinking and consumption of food is not allowed in the work area.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Apply standard precautions during use of the product. Avoid inhalation of gas or dust.
No specific requirements.
Face shield alternatively safety glasses with side shields. Standards: EN166
Type: S/SL, Class: P2, Colour: White, Standards: EN149
Dedicated work clothing should be worn. Wear a protective suit in the event of prolonged periods of work with the product.
No specific requirements.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under the conditions, noted in section 7 "Handling and storage".
No data available.
None known.
None known.
Strong acids, strong bases, strong oxidizing agents, and strong reducing agents.
The product is not degraded when used as specified in section 1.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container to an approved waste disposal plant.
Dispose of contents/container to an approved waste disposal plant.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
If the product is imported or produced in more than 100 kg/year it is subject to registration in the Product Register because it is classified as hazardous.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 5-MAPB hydrochloride, Renstoff?
The signal word is warning.
What is the physical form of 5-MAPB hydrochloride, Renstoff?
5-MAPB hydrochloride, Renstoff is a solid with white color. It has testing not relevant or not possible due to the nature of the product. odor.
What is the solubility of 5-MAPB hydrochloride, Renstoff?
Testing not relevant or not possible due to the nature of the product.
What is 5-MAPB hydrochloride, Renstoff used for?
Laboratory use, Restricted to professional users.
What are the hazard statements for 5-MAPB hydrochloride, Renstoff?
This substance has 4 hazard statements:
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
What is the melting point of 5-MAPB hydrochloride, Renstoff?
The melting point is Testing not relevant or not possible due to the nature of the product. and the boiling point is Does not apply to solids..