NextSDS Logo
Safety Data Sheet EN

d,l-MDMA-D5.HCl, 0.1mg/ml in Methanol

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
d,l-MDMA-D5.HCl, 0.1mg/ml in Methanol
Product Code
LPM-MDM-324-HC-0.1LM
Synonyms
as free base

Regulatory Identifiers

CAS Number
N/A
UFI Code
2VPH-606P-P00Y-XR06

Identified Uses

Laboratory use

Uses advised against

No information available

Manufacturers & Suppliers

LGC Limited logo

LGC Limited

manufacturer

Queens Road, Teddington, Middlesex TW11 0LY, UNITED KINGDOM

+44 (0) 20 8943 7000

http://www.lgcstandards.com

Emergency Contacts

CHEMTREC

1-800-424-9300

CHEMTREC

+1 703-741-3877

Emergency Contact

112

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Acute Tox. Cat. 3 H301
Acute Tox. Cat. 3 H311
Acute Tox. Cat. 3 H331
STOT SE Cat. 1 H370

GHS Pictograms

GHS02 - Flammable

GHS02

GHS06 - Acute toxicity

GHS06

GHS08 - Serious health hazard

GHS08

Hazard Statements

H225 Highly flammable liquid and vapour.
H301 Toxic if swallowed.
H311 Toxic in contact with skin.
H331 Toxic if inhaled.
H370 Causes damage to organs.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
P260 Do not breathe dust, fume, gas, mist, vapors and spray
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor
P403 + P235 Store in a well-ventilated place. Keep cool

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Methanol EC: 200-659-6 67-56-1 80 - 100% Yes
D,L-MDMA-D5 Hydrochloride 2747917-97-9 0.1 - 1% Yes

This product contains a stable isotope

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. IF exposed or concerned: Get medical advice/attention. If breathing has stopped, give artificial respiration. Get medical attention immediately. Immediate medical attention is required. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. If breathing is difficult, (trained personnel should) give oxygen.

Symptoms: Coughing and/ or wheezing. Difficulty in breathing.

Skin contact

Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Get immediate medical attention.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Do not rub affected area. Get immediate medical attention.

Ingestion

Do NOT induce vomiting. Rinse mouth. Never give anything by mouth to an unconscious person. Get immediate medical attention.

Immediate Medical Attention

Immediate medical attention is required.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry chemical. Carbon dioxide (CO2). Water spray. Alcohol resistant foam.

Unsuitable media

Do not scatter spilled material with high pressure water streams.

Specific hazards

Risk of ignition. Keep product and empty container away from heat and sources of ignition.

Instructions

CAUTION: Use of water spray when fighting fire may be inefficient.

Firefighter Protection

Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak. Do not touch or walk through spilled material.

Environmental

Refer to protective measures listed in Sections 7 and 8. Prevent further leakage or spillage if safe to do so.

Cleanup methods

Dam up. Soak up with inert absorbent material. Pick up and transfer to properly labelled containers.

Materials: inert absorbent material

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use personal protection equipment. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use grounding and bonding connection when transferring this material to prevent static discharge, fire or explosion. Use spark-proof tools and explosion-proof equipment. Keep in an area equipped with sprinklers. Use according to package label instructions. Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Take off contaminated clothing and wash it before reuse. Do not breathe vapour or mist. In case of insufficient ventilation, wear suitable respiratory equipment. Handle product only in closed system or provide appropriate exhaust ventilation. Do not eat, drink or smoke when using this product.

Storage

Store only in the original receptacle unless other advice is given on the CoA. Keep containers tightly closed in a dry, cool and well-ventilated place. Refer to the manufacturer's certificate for specific storage and transport temperature conditions.

Hygiene

Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Wash hands before breaks and after work. Wear suitable gloves and eye/face protection. Contaminated work clothing should not be allowed out of the workplace. Regular cleaning of equipment, work area and clothing is recommended. Wash hands before breaks and immediately after handling the product. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Do not breathe vapour or mist.

Fire prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use grounding and bonding connection when transferring this material to prevent static discharge, fire or explosion. Use spark-proof tools and explosion-proof equipment. Keep in an area equipped with sprinklers.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Wear protective butyl rubber gloves. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374. Wear suitable gloves. Impervious gloves.

Eyes

Avoid contact with eyes. Wear safety glasses with side shields (or goggles). Tight sealing safety goggles.

Respiratory

No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.

Skin/Body

Wear suitable protective clothing. Long sleeved clothing. Chemical resistant apron. Antistatic boots.

Environmental

Do not allow into any sewer, on the ground or into any body of water.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Liquid
Colour
colourless
Colour Intensity
---
Form
---
Odor
Alcohol
Odor Threshold
No information available
Ph
---
Melting Point
-98 °C
Boiling Point
64.7 °C
Flash Point
11 °C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
128 hPa @ 20°C
Vapor Density
---
Relative Density
0.791
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
50 Vol% - 665 g/m³
Lower Explosive Limit
6 Vol% - 80 g/m³
Explosive Limits
---
Auto Ignition Temperature
464 °C
Decomposition Temperature
---
Solubility
---
Partition Coefficient
-0.77
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
0.544 - 0.59 mPa s
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

No information available.

Hazardous reactions

None under normal processing.

Avoid

Heat, flames and sparks. Excessive heat.

Incompatible

None known based on information supplied.

Decomposition

None known based on information supplied.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Ecotoxicity Unknown aquatic toxicity Contains 0 % of components with unknown hazards to the aquatic environment. | Chemical name | Algae/aquatic plants | Fish | Toxicity to microorganisms | Crustacea | | --- | --- | --- | --- | --- |

Contains 0 % of components with unknown hazards to the aquatic environment.

12.1. Toxicity

| Chemical name | Algae/aquatic plants | Fish | Toxicity to microorganisms | Crustacea | | Methanol | - | LC50: =28200mg/L (96h, Pimephales promelas) LC50: >100mg/L (96h, Pimephales promelas) LC50: 19500 - 20700mg/L (96h, Oncorhynchus mykiss) LC50: 18 - 20mL/L (96h, Oncorhynchus mykiss) LC50: 13500 - 17600mg/L (96h, Lepomis macrochirus) | - | - |

12.2. Persistence and degradability

Persistence and degradability No information available.

12.3. Bioaccumulative potential

Bioaccumulation Chemical name Partition coefficient Methanol | -0.77

12.4. Mobility in soil

Mobility in soil No information available.

No information available.

12.5. Results of PBT and vPvB assessment

PBT and vPvB assessment Based on available data, the classification criteria are not met. | Chemical name | PBT and vPvB assessment | | --- | --- | | Methanol | The substance is not PBT / vPvB |

Based on available data, the classification criteria are not met. Methanol is not PBT / vPvB.

12.6. Endocrine disrupting properties

Endocrine disrupting properties Based on available data, the classification criteria are not met.

Based on available data, the classification criteria are not met.

12.7. Other adverse effects

Other adverse effects No information available. PMT or vPvM properties Based on available data, the classification criteria are not met.

No information available. PMT or vPvM properties: Based on available data, the classification criteria are not met.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.

Disposal

Should not be released into the environment.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1230
Shipping Name
Methanol mixture
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Take note of Directive 98/24/EC on the protection of the health and safety of workers from the risks related to chemical agents at work.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is d,l-MDMA-D5.HCl, 0.1mg/ml in Methanol known by?

d,l-MDMA-D5.HCl, 0.1mg/ml in Methanol is also known as: as free base

What is the hazard signal word for d,l-MDMA-D5.HCl, 0.1mg/ml in Methanol?

The signal word is danger.

What is the physical form of d,l-MDMA-D5.HCl, 0.1mg/ml in Methanol?

d,l-MDMA-D5.HCl, 0.1mg/ml in Methanol is a liquid appearing as liquid with colourless color. It has alcohol odor.

What is d,l-MDMA-D5.HCl, 0.1mg/ml in Methanol used for?

Laboratory use

What are the hazard statements for d,l-MDMA-D5.HCl, 0.1mg/ml in Methanol?

This substance has 5 hazard statements:

  • H225: Highly flammable liquid and vapour.
  • H301: Toxic if swallowed.
  • H311: Toxic in contact with skin.
  • H331: Toxic if inhaled.
  • H370: Causes damage to organs.

What is the melting point of d,l-MDMA-D5.HCl, 0.1mg/ml in Methanol?

The melting point is -98 °C and the boiling point is 64.7 °C.