Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 2,3-Dihydroxy-2-methylbutanoic Acid Sodium Salt
- Product Form
- Not applicable
- Product Code
- TRC-D454328-00
- Chemical Name
- 2,3-Dihydroxy-2-methylbutanoic Acid Sodium Salt
Regulatory Identifiers
- CAS Number
- 2839062-01-8 Check regulations →
Identified Uses
Laboratory use
Uses advised against
No information available
Manufacturers & Suppliers
LGC GmbH
manufacturer
Louis-Pasteur-Straße 30, 14943 Luckenwalde, GERMANY
+49(0) 3371 689
http://www.lgcstandards.com
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC
+1 703-741-3877
Poison Control Center, Charite Universitätsmedizin Berlin
+493030686700
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This product does not contain candidate substances of very high concern at a concentration >=0.1% (Regulation (EC) No. 1907/2006 (REACH), Article 59).
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2,3-Dihydroxy-2-methylbutanoic Acid Sodium Salt | 2839062-01-8 | 100% | No |
Full text of H- and EUH-phrases: see section 16. Acute Toxicity Estimate: No information available.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air.
Wash skin with soap and water. In the case of skin irritation or allergic reactions see a doctor.
Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids. Consult a doctor.
Rinse mouth.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Do not scatter spilled material with high pressure water streams.
No information available.
Use of water spray when fighting fire may be inefficient.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation.
See Section 12 for additional Ecological Information.
Take up mechanically, placing in appropriate containers for disposal.
Materials: appropriate containers
Related Products
Similar products with comparable safety profiles
3-Hydroxy-2-methylbutanoic Acid
CAS: 473-86-9
2,2-Dichloropropionic acid
CAS: 75-99-0
3,4-Dihydroxybenzoic acid
CAS: 99-50-3
Dichloroisocyanuric acid sodium salt
CAS: 2893-78-9
Dodecylbenzenesulfonic acid sodium salt, tech.
---
1-Heptanesulfonic acid, sodium salt monohydrate
CAS: 207300-90-1
1-Heptanesulfonic acid, sodium salt monohydrate
CAS: 207300-90-1
1,3-Dimethylbarbituric acid
CAS: 769-42-6
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Wash hands before breaks and after work. Wear suitable gloves and eye/face protection.
Please refer to the manufacturer's certificate for specific storage and transport temperature conditions. Store only in the original receptacle unless other advice is given on the CoA.
Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Wash hands before breaks and after work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374. Wear protective nitrile rubber gloves.
Avoid contact with eyes. Wear safety glasses with side shields (or goggles).
No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.
Wear suitable protective clothing.
Do not allow into any sewer, on the ground or into any body of water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No information available.
None under normal processing.
None known based on information supplied.
None known based on information supplied.
None known based on information supplied.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.
Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 2,3-Dihydroxy-2-methylbutanoic Acid Sodium Salt?
The signal word is no signal word.
What is the physical form of 2,3-Dihydroxy-2-methylbutanoic Acid Sodium Salt?
2,3-Dihydroxy-2-methylbutanoic Acid Sodium Salt is a solid appearing as solid with white, to, off-white color. It has no information available odor.
What is the solubility of 2,3-Dihydroxy-2-methylbutanoic Acid Sodium Salt?
Slightly soluble
What is 2,3-Dihydroxy-2-methylbutanoic Acid Sodium Salt used for?
Laboratory use
What is the melting point of 2,3-Dihydroxy-2-methylbutanoic Acid Sodium Salt?
The melting point is > 100 °C and the boiling point is No data available.