Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CD10 (H110A) APC CE
- Product Code
- 332777
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sector of Use SU24 Scientific research and development, Product category PC21 Laboratory chemicals, Process category PROC1 Use in closed process, no likelihood of exposure, Environmental release category ERC7 Industrial use of substances in closed systems
Manufacturers & Suppliers
Becton Dickinson Biosciences Centralized European Office
manufacturer
Erembodegem-Dorp 86, 9320 Erembodegem-Aalst, Belgium
Emergency Contacts
Becton Dickinson Biosciences Centralized European Office
+32 2 400 98 95
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium azide | 26628-22-8 | 0.1% | Yes |
| water | 7732-18-5 | 99.61% | No |
| Gelatin | 9000-70-8 | 0.2% | No |
| sodium chloride | 7647-14-5 | 0.08% | Yes |
| disodium hydrogenorthophosphate | 7558-79-4 | 0.01% | Yes |
| potassium phosphate, monobasic | 7778-77-0 | 0.0002% | No |
| potassium chloride | 7447-40-7 | 0.0002% | Yes |
For the wording of the listed risk phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Seek immediate medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Nitrogen oxides (NOx)
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Damp down dust with water spray.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
Store in cool, dry conditions in well sealed receptacles.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No dangerous reactions known
No further relevant information available.
No further relevant information available. Sodium azide is present in this product. Contact with acidic solutions and metal compounds over time may form potentially explosive metal azides.
Nitrogen oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must be specially treated adhering to official regulations.
Must not be disposed together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Labelling according to EU guidelines: The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials. Code letter and hazard designation of product: Xn Harmful. Hazard-determining components of labeling: Sodium azide. Risk phrases: 22 Harmful if swallowed. Safety phrases: 23 Do not breathe gas/fumes/vapour/spray, 36 Wear suitable protective clothing, 60 This material and its container must be disposed of as hazardous waste.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CD10 (H110A) APC CE?
The signal word is na: r-phrases.
What is the physical form of CD10 (H110A) APC CE?
CD10 (H110A) APC CE is a liquid with according to product specification color. It has characteristic odor.
What is CD10 (H110A) APC CE used for?
Sector of Use SU24 Scientific research and development, Product category PC21 Laboratory chemicals, Process category PROC1 Use in closed process, no likelihood of exposure, Environmental release category ERC7 Industrial use of substances in closed systems
What is the melting point of CD10 (H110A) APC CE?
The melting point is 0°C and the boiling point is 100°C.