Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BILT3
- Product Code
- 05795419190
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For use as part of an IVD method, only
Manufacturers & Suppliers
Roche Diagnostics Limited
manufacturer
Charles Avenue, Burgess Hill, RH15 9RY West Sussex, United Kingdom
+44 1444 256000
Emergency Contacts
Roche Diagnostics Ltd. (Health, Safety & Environment)
+44 1444 256500
Roche Diagnostics Ltd. (Health, Safety & Environment)
+44 7802 260498
Roche Diagnostics Ltd. (Product Safety / Vigilance)
+44 1444 256561
Roche Diagnostics Ltd. (Product Safety / Vigilance)
+44 7710 391653
NPIS
+44 344 892 0111
NHS Direct in Wales
111
NHS Direct in Wales
+44 845 4647
NHS 111 in England/NHS 24 in Scotland
111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS05
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Poly(oxy-1,2-ethanediyl), .alpha.-(phenylmethyl)-.omega.-[(1,1,3,3-tetramethylbutyl)phenoxy]- | 60864-33-7 | 2.5 - 10% | Yes |
| tetrahydrothiophene 1,1-dioxide EC: 204-783-1 | 126-33-0 | 1 - 10% | Yes |
| Dodecan-1-ol, ethoxylated EC: 500-002-6 | 9002-92-0 | 1 - 10% | Yes |
| alpha-[(1,1,3,3-Tetramethylbutyl)phenyl]-omega-hydroxypoly(oxy-1,2-ethanediyl) | 9036-19-5 | 1 - 2.5% | Yes |
| Sodium metaborate tetrahydrate EC: 231-891-6 | 10555-76-7 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
Immediate medical treatment is necessary. If on skin, rinse well with water. If on clothes, remove clothes.
Symptoms: Untreated wounds from corrosion of the skin heal slowly and with difficulty.
Rinse immediately with plenty of water and seek medical advice. Continue rinsing eyes during transport to hospital. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Symptoms: Small amounts splashed into eyes can cause irreversible tissue damage and blindness.
Clean mouth with water and drink afterwards plenty of water. Keep respiratory tract clear. Do NOT induce vomiting. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Take victim immediately to hospital. Rinse mouth with water.
Immediate Medical Attention
Immediate medical treatment is necessary (for skin). Take victim immediately to hospital (for ingestion).
Medical Treatment
The first aid procedure should be established in consultation with the doctor responsible for industrial medicine.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
Do not allow run-off from fire fighting to enter drains or water courses.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Refer to protective measures listed in sections 7 and 8.
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so.
Soak up with inert absorbent material
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe vapours/dust. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. For personal protection see section 8.
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Electrical installations / working materials must comply with the technological safety standards.
Smoking, eating and drinking should be prohibited in the application area. When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No data available
In case of contact through splashing: Material: Nitrile rubber, Break through time: > 30 min, Glove thickness: > 0,11 mm. In case of full contact: Material: butyl-rubber, Break through time: > 480 min, Glove thickness: > 0,4 mm. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.
Eye wash bottle with pure water, Tightly fitting safety goggles, Wear face-shield and protective suit for abnormal processing problems. Use eye protection according to EN 166.
In the case of vapour formation use a respirator with an approved filter.
Impervious clothing. Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
No decomposition if stored and applied as directed.
No data available
No data available
No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Send to a licensed waste management company.
For customers in the European Economic Area: Contains SVHC: octyl/nonylphenol ethoxylates. For use as IVD only – cartridges / rests of product to be disposed of as if it was hazardous waste
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3316
- Shipping Name
- CHEMICAL KIT
- Transport Class
- 9
- Packing Group
- III
No data available
No data available
Packing instruction (cargo aircraft) : 960, Packing instruction (LQ) : Y960, Packing instruction (passenger aircraft) : 960
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is subject to the supply restrictions of the Ordinance on the Prohibition of Chemicals. Take note of Law on the protection of mothers at work, in education and in studies (Maternity Protection Act - MuSchG). Take note of Directive 94/33/EC on the protection of young people at work.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BILT3?
The signal word is danger.
What is the physical form of BILT3?
BILT3 is a liquid with clear, colourless color. It has no data available; odourless odor.
What is the solubility of BILT3?
No data available
What is BILT3 used for?
For use as part of an IVD method, only
What are the hazard statements for BILT3?
This substance has 3 hazard statements:
- H290: May be corrosive to metals.
- H319: Causes serious eye irritation.
- H360FD: May damage fertility. May damage the unborn child.
What is the melting point of BILT3?
The melting point is No data available and the boiling point is ca. 100 °C (1.013 hPa).