Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ALCASPEC
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- XQ10-20CX-W002-WXY0
Identified Uses
Alkaline cleaner/ detergent; PW Widespread use by professional workers; IS Use at industrial Sites; PC14 Metal surface treatment products; PC35 Washing and cleaning products (including solvent based products)
Uses advised against
Any use other than those identified is not recommended.
Manufacturers & Suppliers
SPECIALITIES s.r.l.
manufacturer
Via N. Sauro, 11, 24030 BERBENNO (BG) - ITALY
+39-0354195181
Emergency Contacts
Specialities S.r.l.
+39-0354195181
8.00 - 17.00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| C9-11 Alcohol ethoxylate (4EO) | 68439-46-3 | 2 - 5% | Yes |
| C9-11 Alcohol ethoxylate, 5.5EO | 68439-46-3 | 1 - 2% | Yes |
| Quaternary C12-14 alkyl methyl amine ethoxylate methyl chloride | 1554325-20-0 | 1 - 2% | Yes |
| sodium hydroxide EC: 215-185-5 | 1310-73-2 | 1 - 2% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly.
Symptoms: corrosive, burning, irritation
Rinse opened eye for several minutes under running water. Then consult a doctor.
Symptoms: corrosive, corneal damage, irritation
Rinse out mouth and then drink plenty of water. If ingested do not induce vomiting, seek medical assistance showing the safety data sheet or the hazard label
Immediate Medical Attention
Seek medical assistance showing the safety data sheet or the hazard label; consult a doctor after eye contact.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray.
None in particular
No further relevant information available.
Firefighter Protection
Wear personal protective clothing. See Section 8 for information on personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
You should follow the usual precautions for handling chemical products. See Section 8 for information on personal protection equipment. Avoid contact with eyes and skin.
Keep container tightly sealed.
The product is not flammable.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Nitrile rubber, NBR, Neoprene gloves. Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. Breakthrough time: >= 480 min - Material thickness: >= 0.7 mm; Breakthrough time: >= 60 min - Material thickness: >= 0.5 mm; Breakthrough time: >= 30 min - Material thickness: >= 0.2 mm
Tightly sealed goggles
Not necessary if room is well-ventilated.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under normal conditions of use and storage
No hazardous reactions when stored and handled according to instructions
Reacts with strong acids. Exothermic reaction.
No further relevant information available.
No further relevant information available.
When heated or in case of fire can release gases and vapors which are dangerous to health. Nitrogen oxides (NOx)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not discard the product or its packaging. Do not empty into drains. Recycle the product. When recycling is not possible, dispose through an authorized company in compliance with the local or national regulations.
Recycle the product. When recycling is not possible, dispose through an authorized company in compliance with the local or national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1719
- Shipping Name
- CAUSTIC ALKALI LIQUID, N.O.S. (SODIUM HYDROXIDE)
- Transport Class
- 8
- Packing Group
- III
Warning: Corrosive substances.
Warning: Corrosive substances.
Warning: Corrosive substances.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety data sheet prepared in accordance with Regulation 1907/2006/EC Article 31, Regulation (EU) No 878/2020 as subsequent amendments.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ALCASPEC?
The signal word is danger.
What is the physical form of ALCASPEC?
ALCASPEC is a fluid appearing as fluid with light yellow color. It has characteristic odor.
What is ALCASPEC used for?
Alkaline cleaner/ detergent; PW Widespread use by professional workers; IS Use at industrial Sites; PC14 Metal surface treatment products; PC35 Washing and cleaning products (including solvent based products)
What are the hazard statements for ALCASPEC?
This substance has 1 hazard statement:
- H314: Causes severe skin burns and eye damage.
What is the melting point of ALCASPEC?
The melting point is Undetermined. and the boiling point is 100 °C.