Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SOLUSCOPE P
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Instrument Disinfectant
Uses advised against
Reserved for industrial and professional use.
Manufacturers & Suppliers
ECOLAB PTY LTD
manufacturer
2 Drake Avenue Macquarie Park, NSW Australia 2113
1 800 022 002
Emergency Contacts
Emergency Contact
1800 205 506
Emergency Contact
+64 7 958 2372
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS05
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Treat symptomatically. Get medical attention if symptoms occur.
Wash off immediately with plenty of water for at least 15 minutes. Use a mild soap if available. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention immediately.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention immediately.
Contact the Poison's Information Centre (eg Australia 13 1126; New Zealand 0800 764 766). Rinse mouth with water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Immediate Medical Attention
Get medical attention immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
Fire Hazard. Keep away from heat and sources of ignition. Flash back possible over considerable distance. Oxidizer. Contact with other material may cause fire. Oxidizer; material is an oxidizer which may readily react with other materials, especially upon heating. Exposure to decomposition products may be a hazard to health.
Use water spray to cool unopened containers. In the event of fire and/or explosion do not breathe fumes.
Firefighter Protection
In case of fire, wear a full face positive-pressure self contained breathing apparatus and protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure clean-up is conducted by trained personnel only. Keep people away from and upwind of spill/leak. Stop leak if safe to do so.
For small spills contain with sand or vermiculite and dilute the contained product at least 10 times with water. Transfer to an open topped container and remove to a safe place for neutralization* / disposal.
For large spills contain spill and evacuate the area, leave until the reaction subsides, then collect up for disposal.
Do not allow contact with soil, surface or ground water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not ingest. Do not breathe dust/fume/gas/mist/vapours/spray. Use only with adequate ventilation. Keep away from fire, sparks and heated surfaces. Take necessary action to avoid static electricity discharge (which might cause ignition of organic vapours). Wash hands thoroughly after handling. Do not get in eyes, on skin, or on clothing. Do not mix with bleach or other chlorinated products – will cause chlorine gas. In case of mechanical malfunction, or if in contact with unknown dilution of product, wear full Personal Protective Equipment (PPE).
Keep away from heat and sources of ignition. Do not store on wooden pallets. Keep in a cool, well-ventilated place. Keep away from reducing agents. Keep away from combustible material. Keep out of reach of children. Keep container tightly closed. Store in suitable labeled containers. Pressure bursts may occur due to gas evolution if the container is not adequately vented. May be stored with other similar strong oxidizing agents, provided they are compatible.
Wash hands thoroughly after handling.
Keep away from fire, sparks and heated surfaces. Take necessary action to avoid static electricity discharge (which might cause ignition of organic vapours).
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Contamination may result in dangerous pressure increases - closed containers may rupture.
No dangerous reaction known under conditions of normal use.
Do not mix with bleach or other chlorinated products – will cause chlorine gas.
Heat, flames and sparks. Direct sources of heat. Exposure to sunlight.
Bases Metals Organic materials
In case of fire hazardous decomposition products may be produced such as: Carbon oxides Oxygen
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3149
- Shipping Name
- HYDROGEN PEROXIDE AND PEROXYACETIC ACID MIXTURE, STABILIZED
- Transport Class
- 5.1 (8)
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SOLUSCOPE P?
The signal word is danger.
What is the physical form of SOLUSCOPE P?
SOLUSCOPE P is a liquid appearing as liquid with clear, colourless color. It has vinegar-like odor.
What is SOLUSCOPE P used for?
Instrument Disinfectant
What are the hazard statements for SOLUSCOPE P?
This substance has 5 hazard statements:
- H272: May intensify fire; oxidiser.
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
- H335: May cause respiratory irritation.
- Combustible liquid
What is the melting point of SOLUSCOPE P?
The melting point is no data available and the boiling point is no data available.