Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- POLYESTERLIQUIDE
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive
Manufacturers & Suppliers
SOUDAL N.V.
manufacturer
Everdongenlaan 18-20, B-2300 Turnhout
+32 14 42 42 31
Emergency Contacts
Brandweerinformatiecentrum voor gevaarlijke stoffen (B.I.G.)
+32 14 58 45 45
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS02
GHS07
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| styrene EC: 202-851-5 | 100-42-5 | 20% | Yes |
Notes
(1) For R-phrases in full: see heading 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim into fresh air. Seek medical advice.
Rinse immediately with plenty of water. If irritation persists: seek medical advice.
Rinse immediately with plenty of water. Seek medical advice.
Never give water to an unconscious person. Do not induce vomiting. Seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Polyvalent foam, Alcohol-resistant foam, BC powder, Carbon dioxide
Solid water jet ineffective as extinguishing medium
On burning: release of carbon monoxide and carbon dioxide, May build up electrostatic charges: risk of ignition, Gas/vapour flammable with air within explosion limits
Cool drums with water spray, Do not move the load if exposed to heat
Firefighter Protection
Heat/fire exposure: compressed air/oxygen apparatus
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use appropriate containment to avoid environmental contamination
Take up liquid spill into absorbent material e.g.: sand/earth; Take collected spill to competent authority; Wash clothing and equipment after handling
Related Products
Similar products with comparable safety profiles
ETHYLENE GLYCOL, POLYESTER GRADE
CAS: 107-21-1
ETHYLENE GLYCOL POLYESTER GRADE
CAS: 107-21-1
POLYVINYL ALCOHOL
CAS: 9002-89-5
RESION Polyester Laminating Resin
UFI: 2M00-A06D-Y005-AJU3
GLYCOL ETHER EB ACETATE
CAS: 112-07-2
MONOPROPYLENE GLYCOL
CAS: 57-55-6
POLYMER REMOVER
---
PROPYLENE-POLYMER GRADE
CAS: 115-07-1
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle and open the container with care
Keep container tightly closed; Store in a cool area; Storage temperature: Roomtemperature
Observe normal hygiene standards
In case of insufficient ventilation: keep naked flames/sparks away
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only in well ventilated area
Chemically resistant gloves
Safety glasses
High gas/vapour concentration: gas mask with filter type A
Suitable protective clothing
see heading 13
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Unstable on exposure to heat
Polymerizes on exposure to temperature rise: (increased) risk of fire/explosion; Reacts with (strong) oxidizers: (increased) risk of fire/explosion; Reacts with (some) acids: (increased) risk of fire/explosion
heat sources, ignition sources, temperature rise
combustible materials, oxidizing agents, acids, bases, halogens
On burning: release of carbon monoxide and carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Incinerate under surveillance
Do not discharge into drains or the environment
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3269
- Shipping Name
- Polyester resin kit
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Labelling in accordance with directives 67/548/EEC and 1999/45/EC
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for POLYESTERLIQUIDE?
The signal word is warning.
What is the physical form of POLYESTERLIQUIDE?
POLYESTERLIQUIDE is a liquid appearing as liquid with light brown color. It has solvent odor.
What is POLYESTERLIQUIDE used for?
Adhesive
What are the hazard statements for POLYESTERLIQUIDE?
This substance has 3 hazard statements:
- H221: Flammable
- H315: Irritating to eyes and skin
- H332: Harmful by inhalation
What is the melting point of POLYESTERLIQUIDE?
The melting point is N.D. °C and the boiling point is > 145 °C.