Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Soudal PU Gun & Foam Cleaner commonly used cleansing agent.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H222: Extremely flammable aerosol.
- H229: Pressurized container: may burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
Precautionary Statements
- P101: If medical advice is needed, have product container or label at hand.
- P102: Keep out of reach of children.
- P103: Read label before use.
- P210: Keep away from heat/sparks/open flames/hot surfaces. No smoking.
- P211: Do not spray on an open flame or other ignition sources.
- P251: Do not pierce or burn, even after use.
- P261: Avoid breathing dust, fume, gas, mist, vapours or spray..
- P264: Wash hands, face and all exposed skin thoroughly after handling.
- P271: Use only outdoors or in a well-ventilated area.
- P280: Wear protective clothing, gloves, eye/face protection and suitable respirator.
- P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P312: Call a POISON CENTRE or doctor/physician if you feel unwell.
- P337 + P313: If eye irritation persists: Get medical advice/attention.
- P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
- P405: Store locked up.
- P410 + P412: Protect from sunlight. Do not expose to temperatures exceeding 50 C/122 F.
- P501: Dispose of contents/container in accordance with local, regional, national and international regulations.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Soudal Pty Ltd
undefined
1 Tollis Place Seven Hills NSW 2147 Australia
AU
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Soudal Pty Ltd
1300 507 011
AU
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ACETONE EC: 200-662-2 | 67-64-1 | 25% | ⚠️ Hazardous |
| opaan EC: 200-827-9 | 74-98-6 | 10-20% | ⚠️ Hazardous |
| Butane | 106-97-8 | 10-20% | ⚠️ Hazardous |
| Propane, 2-methyl- EC: 200-857-2 | 75-28-5 | 10-20% | ⚠️ Hazardous |
| Ingredients determined to be Non-Hazardous | N/A | Not specified | ✓ Non-hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove victim from exposure - avoid becoming a casualty. Remove contaminated clothing and loosen remaining clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest until fully recovered. Seek medical advice if effects persist.
🖐️ Skin Contact
If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. For gross contamination, immediately drench with water and remove clothing. Continue to flush skin and hair with plenty of water (and soap if material is insoluble). For skin burns, cover with a clean, dry dressing until medical help is available.
Symptoms:
swelling, redness, blistering or irritation
👁️ Eye Contact
If in eyes, hold eyelids apart and flush the eyes continuously with running water. Continue flushing until advised to stop by the Poisons Information Centre or a Doctor; or for at least 15 minutes and transport to Doctor or Hospital.
🍽️ Ingestion/Swallowing
Rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass of water to drink. Never give anything by the mouth to an unconscious patient. If vomiting occurs give further water. Seek medical advice.
🚨 Immediate Medical Attention Required
Seek medical advice if effects persist, or if swelling, redness, blistering or irritation occurs. Transport to Doctor or Hospital for eye contact. Seek medical advice for ingestion.
Medical Treatment
Treat symptomatically.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Ensure ventilation is adequate to maintain air concentrations below Exposure Standards. Use only in well ventilated areas. Use with local exhaust ventilation or while wearing appropriate respirator.
🧤 Hand Protection
Wear gloves. Available information suggests that gloves made from should be suitable for intermittent contact. However, due to variations in glove construction and local conditions, the user should make a final assessment.
👁️ Eye Protection
SAFETY GLASSES. Wear safety glasses.
😷 Respiratory Protection
RESPIRATOR. Use with local exhaust ventilation or while wearing appropriate respirator. If inhalation risk exists wear organic vapour/particulate respirator meeting the requirements of AS/NZS 1715 and AS/NZS 1716.
🦺 Skin/Body Protection
APRON. Wear apron.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
1950
⚠️ Transport Hazard Class
2.1
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Soudal PU Gun & Foam Cleaner?
The signal word for this substance is "danger".
What is the physical form of Soudal PU Gun & Foam Cleaner?
Soudal PU Gun & Foam Cleaner is a aerosol with colourless color. It has acetone odor.
What is Soudal PU Gun & Foam Cleaner used for?
Cleansing agent
What are the hazard statements for Soudal PU Gun & Foam Cleaner?
This substance has 4 hazard statements: H222: Extremely flammable aerosol. H229: Pressurized container: may burst if heated. H319: Causes serious eye irritation. H336: May cause drowsiness or dizziness.
What is the melting point of Soudal PU Gun & Foam Cleaner?
The melting point is N av and the boiling point is N Av.