OKS 1110

Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

Remove contaminated clothing. If irritation develops, get medical attention. Wash off with soap and water.

Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. If eye irritation persists, consult a specialist.

Move the victim to fresh air. Do not induce vomiting without medical advice.

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

High volume water jet

Standard procedure for chemical fires.

Evacuate personnel to safe areas.

Try to prevent the material from entering drains or water courses.

Clean up promptly by sweeping or vacuum.

Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product.

Store in original container. Keep container closed when not in use. Keep in a dry, cool and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in accordance with the particular national regulations. Keep in properly labelled containers.

Wash face, hands and any exposed skin thoroughly after handling.

It is recommended that all dust control equipment such as local exhaust ventilation and material transport systems involved in handling of this product contain explosion relief vents or an explosion suppression system or an oxygen deficient environment.

Material : Nitrile rubber; Break through time : > 10 min; Protective index : Class 1; Remarks : For prolonged or repeated contact use protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.

Safety glasses with side-shields

Not required; except in case of aerosol formation. Filter type : Filter type P

Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.

Air : No special environmental precautions required. Soil : The product should not be allowed to enter drains, water courses or the soil. Water : The product should not be allowed to enter drains, water courses or the soil.

Stable under normal conditions.

No hazards to be specially mentioned.

No dangerous reaction known under conditions of normal use.

No conditions to be specially mentioned.

No materials to be especially mentioned.

>150 °C small quantities of formaldehyde may be formed.

The product should not be allowed to enter drains, water courses or the soil.

Waste codes should be assigned by the user based on the application for which the product was used.