NextSDS Logo
Safety Data Sheet EN

OKS 511

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
OKS 511

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricant

Uses advised against

Restricted to professional users.

Manufacturers & Suppliers

O

OKS Spezialschmierstoffe GmbH

manufacturer

Ganghoferstr. 47 D-82216 Maisach-Gernlinden

+49 8142 3051 500

Emergency Contacts

Emergency Contact

+49 8142 3051 517

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aerosol Cat. 1 H229
Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318
STOT SE Cat. 3 H336
Asp. Tox. Cat. 1 H304
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS02 - Flammable

GHS02

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P280 Wear protective gloves/ eye protection/ face protection.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/ doctor.
P331 Do NOT induce vomiting.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122 °F.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Naphtha (petroleum), hydrotreated light; Low boiling point hydrogen treated naphtha EC: 265-151-9 64742-49-0 10 - 20% Yes
n-butyl acetate EC: 204-658-1 123-86-4 1 - 10% Yes
Naphtha (petroleum), hydrotreated light; Low boiling point hydrogen treated naphtha EC: 927-241-2 64742-49-0 2.5 - 10% Yes
xylene EC: 215-535-7 1330-20-7 1 - 10% Yes
ethylbenzene EC: 202-849-4 100-41-4 1 - 2.5% Yes
butan-1-ol EC: 200-751-6 71-36-3 1 - 3% Yes
butane EC: 203-448-7 106-97-8 20 - 30% Yes
propane EC: 200-827-9 74-98-6 10 - 20% Yes
isobutane EC: 200-857-2 75-28-5 10 - 20% Yes
Graphite EC: 231-955-3 7782-42-5 1 - 10% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. If breathing is irregular or stopped, administer artificial respiration.

Symptoms: Unconsciousness, Dizziness, Drowsiness, Headache, Nausea, Tiredness.

Skin contact

Take off all contaminated clothing immediately. Wash off immediately with soap and plenty of water. Get medical attention immediately if irritation develops and persists. Wash clothing before reuse. Thoroughly clean shoes before reuse.

Symptoms: Erythema, Causes skin irritation.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. Get medical attention immediately.

Ingestion

Move the victim to fresh air. If accidentally swallowed obtain immediate medical attention. Keep respiratory tract clear. Do NOT induce vomiting. Rinse mouth with water.

Symptoms: Aspiration may cause pulmonary oedema and pneumonitis.

Immediate Medical Attention

Get medical attention immediately.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

ABC powder

Unsuitable media

High volume water jet

Specific hazards

Fire Hazard. Do not let product enter drains. Contains gas under pressure; may explode if heated. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.

Instructions

Standard procedure for chemical fires.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment. Exposure to decomposition products may be a hazard to health.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate personnel to safe areas. Ensure adequate ventilation. Remove all sources of ignition. Do not breathe vapours or spray mist. Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. Refer to protective measures listed in sections 7 and 8.

Environmental

Do not allow contact with soil, surface or ground water. Prevent further leakage or spillage if safe to do so.

Cleanup methods

collect with non-combustible absorbent material, and place in container for disposal according to local / national regulations (see section 13). Keep in suitable, closed containers for disposal.

Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not use in areas without adequate ventilation. Do not breathe vapours or spray mist. In case of insufficient ventilation, wear suitable respiratory equipment. Avoid contact with skin and eyes. Keep away from fire, sparks and heated surfaces. Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product. Do not get in eyes or mouth or on skin. Do not get on skin or clothing. Do not ingest. Do not use sparking tools. These safety instructions also apply to empty packaging which may still contain product residues. Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50 °C. Do not pierce or burn, even after use.

Storage

BEWARE: Aerosol is pressurized. Keep away from direct sun exposure and temperatures over 50 °C. Do not open by force or throw into fire even after use. Do not spray on flames or red-hot objects. Store in accordance with the particular national regulations.

Hygiene

Wash face, hands and any exposed skin thoroughly after handling.

Fire prevention

Keep away from fire, sparks and heated surfaces. Do not spray on flames or red-hot objects.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use only in an area equipped with explosion proof exhaust ventilation. Handle only in a place equipped with local exhaust (or other appropriate exhaust).

Hands

Material: butyl-rubber. Break through time: > 10 min. Protective index: Class 1. Remarks: Wear protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.

Eyes

Tightly fitting safety goggles

Respiratory

Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines. Short term only. Filter type: Filter type A-P

Skin/Body

Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
aerosol
Physical State Data
aerosol
State Under Standard Conditions
---
Appearance
---
Colour
black
Colour Intensity
---
Form
---
Odor
characteristic
Odor Threshold
No data available
Ph
Not applicable substance/mixture is non-soluble (in water)
Melting Point
No data available
Boiling Point
-161 °C (1.013 hPa)
Flash Point
-60 °C Method: Abel-Pensky
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No data available
Vapor Pressure
3.600 hPa (20 °C)
Vapor Density
---
Relative Density
0,7 (20 °C) Reference substance: Water The value is calculated
Bulk Density
No data available
Density
0,70 g/cm3 (20 °C)
Flammability
Extremely flammable aerosol.
Upper Explosive Limit
10,9 %(V)
Lower Explosive Limit
0,6 %(V)
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
No data available
Solubility
---
Partition Coefficient
No data available
Solubility In Water
insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
Not corrosive to metals
Dynamic Viscosity
No data available
Kinematic Viscosity
< 20,5 mm2/s (40 °C)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

No hazards to be specially mentioned.

Hazardous reactions

No dangerous reaction known under conditions of normal use.

Avoid

Heat, flames and sparks. Strong sunlight for prolonged periods. Risk of receptacle bursting.

Incompatible

Oxidizing agents

Decomposition

No decomposition if stored and applied as directed.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
AEROSOLS
Transport Class
2.1
Packing Group
Not assigned by regulation
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for OKS 511?

The signal word is danger.

What is the physical form of OKS 511?

OKS 511 is a aerosol with black color. It has characteristic odor.

What is OKS 511 used for?

Lubricant

What are the hazard statements for OKS 511?

This substance has 7 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.
  • H304: May be fatal if swallowed and enters airways.
  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.
  • H336: May cause drowsiness or dizziness.
  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of OKS 511?

The melting point is No data available and the boiling point is -161 °C (1.013 hPa).