Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Agar, Bacteriological
- Product Code
- A20030
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Research Products International Corp.
410 N Business Center Drive Mount Prospect, IL 60056
847-635-7330
Emergency Contacts
Emergency Contact
1-800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Agar EC: 232-658-1 | 9002-18-0 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air and monitor breathing. If breathing becomes difficult, give oxygen. If breathing stops, give artificial respiration. Consult a doctor.
Immediately wash skin with copious amounts of soap and water for at least 15 minutes. Remove contaminated clothing and shoes and wash before reuse. Consult a doctor.
Flush with copious amounts of water for at least 15 minutes. Consult a doctor.
Rinse mouth with water. Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Consult a doctor.
Immediate Medical Attention
Immediate medical attention is required. Show this safety data sheet to the doctor in attendance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide
Due to its non-flammable nature, the product does not present a fire risk under normal conditions of storage, manipulation and use.
Firefighter Protection
Wear suitable protective clothing to prevent contact with skin and eyes and self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Ensure adequate ventilation. Avoid breathing vapors, mist, dust or gas.
Do not let product enter drains.
Using non-spark tools, sweep up material and place in an appropriate container.
Related Products
Similar products with comparable safety profiles
MRS Agar for microbiology
---
Plate Count agar acc. ISO 4833, ISO 17410 and FDA-BAM
---
Bile Esculin Azide Agar DEV, ISO 7899-2:2000, for microbiology for microbiology
---
ROGOSA agar Lactobacillus selective agar for microbiology
---
BAIRD PARKER AGAR
---
MRS agar (de MAN, ROGOSA and SHARPE) acc. ISO 15214 GranuCult®
---
Bacillol AF Tissues
---
DRBC (Dichloran-rose bengal chloramphenicol) agar acc. ISO 21527 and FDA-BAM GranuCult®
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use in a chemical fume hood, with air supplied by an independent system. Avoid inhalation, contact with eyes, skin and clothing. Avoid the formation of dust and aerosols. Use in a well-ventilated area. Keep away from sources of ignition. Avoid prolonged or repeated exposure.
Store in cool, well-ventilated area. Keep away from direct sunlight. Keep container tightly sealed until ready for use. Store at room temperature.
Avoid inhalation, contact with eyes, skin and clothing.
Keep away from sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use in a fume hood where applicable. Ensure all engineering measures described under section 7 of SDS are in place. Ensure laboratory is equipped with a safety shower and eye wash station.
Face shield and safety glasses. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Wear appropriate protective clothing. Complete suit protecting against chemicals. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Do not let product enter drains
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No Data Available.
No data available.
No Data Available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
managed in an appropriate and approved waste disposal facility
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Dispose of container and unused contents in accordance with federal, state and local requirements.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Agar, Bacteriological?
The signal word is no signal word.
What is the physical form of Agar, Bacteriological?
Agar, Bacteriological is a solid appearing as solid . It has no data available odor.
What are the hazard statements for Agar, Bacteriological?
This substance has 1 hazard statement:
- Not hazardous
What is the melting point of Agar, Bacteriological?
The melting point is No Data Available and the boiling point is No Data Available.