NextSDS Logo
Safety Data Sheet EN

ProBlock™ Gold Mammalian Protease Inhibitor Cocktail

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
ProBlock™ Gold Mammalian Protease Inhibitor Cocktail
Product Code
GB-331
Synonyms
ProBlock™ Gold Mammalian

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Provides excellent inhibition of protease activities during protein purification from mammalian cells and tissues.

Uses advised against

This product is not for use in humans. It is for research purposes only.

Manufacturers & Suppliers

G

Gold Biotechnology, Inc.

distributor

1328 Ashby Rd., St. Louis, MO 63132

(314) 890-8778

Emergency Contacts

Emergency Contact

(800)248-7609

Monday-Friday, 9:00 a.m. – 5:00 p.m. CST

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
STOT SE Cat. 3
Flam. Liq. Cat. 4

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H227 Combustible liquid
H301 Toxic if swallowed
H303 May be harmful if swallowed
H314 Causes severe skin burns and eye damage
H318 Causes serious eye damage

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces – No smoking
P260 Do not breathe dust/fume/gas/mist/vapours/spray
P264 Wash skin thoroughly after handling
P270 Do not eat, drink or smoke when using this product
P280 Wear protective gloves/protective clothing/eye protection/face protection
P310 Immediately call a POISON CENTER or doctor/physician
P321 Specific treatment (see First Aid Measures on this label)
P363 Wash contaminated clothing before reuse
P405 Store locked up
P501 Dispose of contents/container to an approved waste disposal plant
IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing
In case of fire: Use dry sand, dry chemical, or alcohol resistant foam for extinction
Store in a well ventilated place. Keep cool

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Dimethyl Sulfoxide (DMSO) 67-68-5 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

Skin contact

Immediately wash skin copiously with soap and water. Take victim immediately to hospital. Consult a physician.

Eye contact

Immediately rinse out with water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. Consult a physician.

Ingestion

Wash out mouth with water. Drink plenty of water. Consult a physician. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Take victim immediately to hospital.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Specific hazards

During a fire, highly toxic gases may be generated by thermal decomposition or combustion – carbon oxides and sulfur oxides.

Firefighter Protection

Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.

Environmental

Do not let product enter drains.

Cleanup methods

Soak up with absorbent material, discard.

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Always wear personal protective equipment (PPE, see section 8).

Storage

Keep container tightly closed. Store at 4°C.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Contains no substances with occupational exposure limit values.

Hands

Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique - without touching outer surface of glove - to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices.

Eyes

Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Respiratory

Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Skin/Body

Wear appropriate protective clothing to prevent exposure.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility
Not Available
Colour Intensity
---
Metal Corrosion
---
Solidification Point
---
Crystallisation Point
---
Solubility In Water
---
Decomposition Temperature
Not Available
State Under Standard Conditions
---
Bulk Density
---
Voc Content
---
Ph
Not Available
Physical State
Clear liquid
Physical State Data
liquid
Vapor Pressure
Not Available
Properties Status
---
Relative Density
Not Available
Freezing Point
Not Available
Lower Explosive Limit
Not Available
Form
---
Relative Evaporation Rate
---
Partition Coefficient
Not Available
Density
---
Colour
---
Appearance
Clear liquid
Vapor Density
Not Available
Boiling Point
Not Available
Upper Explosive Limit
Not Available
Molecular Weight
---
Melting Point
Not Available
Dynamic Viscosity
Not Available
Flammability
---
Softening Point
---
Flash Point
Not Available
Odor Threshold
Not Available
Explosive Limits
---
Auto Ignition Temperature
Not Available
Evaporation Rate
Not Available
Solubility In Fat
---
Odor
Not Available
Kinematic Viscosity
Not Available
Cloud Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

Not available

Hazardous reactions

Not available.

Avoid

Incompatible materials.

Incompatible

Strong oxidizing agents.

Decomposition

Hazardous decomposition products formed under fire conditions. - carbon oxides and sulfur oxides.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Dispose of product in accordance with local rules and regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is ProBlock™ Gold Mammalian Protease Inhibitor Cocktail known by?

ProBlock™ Gold Mammalian Protease Inhibitor Cocktail is also known as: ProBlock™ Gold Mammalian

What is the hazard signal word for ProBlock™ Gold Mammalian Protease Inhibitor Cocktail?

The signal word is warning.

What is the physical form of ProBlock™ Gold Mammalian Protease Inhibitor Cocktail?

ProBlock™ Gold Mammalian Protease Inhibitor Cocktail is a clear liquid appearing as clear liquid . It has not available odor.

What is the solubility of ProBlock™ Gold Mammalian Protease Inhibitor Cocktail?

Not Available

What is ProBlock™ Gold Mammalian Protease Inhibitor Cocktail used for?

Provides excellent inhibition of protease activities during protein purification from mammalian cells and tissues.

What are the hazard statements for ProBlock™ Gold Mammalian Protease Inhibitor Cocktail?

This substance has 5 hazard statements:

  • H227: Combustible liquid
  • H301: Toxic if swallowed
  • H303: May be harmful if swallowed
  • H314: Causes severe skin burns and eye damage
  • H318: Causes serious eye damage

What is the melting point of ProBlock™ Gold Mammalian Protease Inhibitor Cocktail?

The melting point is Not Available and the boiling point is Not Available.