NextSDS Logo
Safety Data Sheet EN

Pierce Protease Inhibitor Tablets

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Pierce Protease Inhibitor Tablets
Product Code
A32963
Chemical Name
Not Applicable

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Use as laboratory reagent, Scientific research and development

Uses advised against

Not for consumer use.

Manufacturers & Suppliers

L

LIFE TECHNOLOGIES EUROPE BV

manufacturer

KWARTSWEG 2, 2665 NN BLEISWIJK, NETHERLANDS

31-(0)180 392 400

P

Pierce Biotechnology

manufacturer

P.O. Box 117, Rockford, IL 61105, United States

1.815.968.0747

L

Life Technologies Limited

manufacturer

3 Fountain Drive, Inchinnan Business Park, Paisley, PA4 9RF, UK

+44 (0)141 814 6100

Emergency Contacts

CHEMTREC

1-800-424-9300

CHEMTREC

+1 703-527-3887

CHEMTREC

+1 703-741-5970

CHEMTREC Ireland

+(353)-19014670

EN, GA

CHEMTREC UK

+(44)-870-8200418

EN

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1
Eye Dam. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H314 Causes severe skin burns and eye damage

Precautionary Statements

P264 Wash hands thoroughly after handling
P280 Wear protective gloves/protective clothing/eye protection/face protection
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician
P303 + P361 + P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
P310 Immediately call a POISON CENTER or doctor/physician
P330 Rinse mouth
P331 Do NOT induce vomiting
P363 Wash contaminated clothing before reuse
P501 Dispose of contents/ container to an approved waste disposal plant

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Chemical Name CAS Number Concentration Hazardous
Benzenesulfonyl fluoride, 4-(2-aminoethyl)-, hydrochloride 30827-99-7 5 - 10% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. If not breathing, give artificial respiration. If symptoms persist, call a doctor.

Skin contact

Wash off immediately with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Immediate medical attention is required.

Symptoms: Causes severe skin burns

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Immediate medical attention is required. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Symptoms: Causes severe eye damage

Ingestion

Never give anything by mouth to an unconscious person. Do not induce vomiting without medical advice. Get medical attention if symptoms occur.

Immediate Medical Attention

Immediate medical attention is required for skin and eye contact. Get medical attention if symptoms occur for ingestion. If symptoms persist for inhalation. If skin irritation occurs: Get medical advice/ attention.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray. Carbon dioxide (CO2). Foam. Dry chemical.

Specific hazards

Not known.

Firefighter Protection

Wear self-contained breathing apparatus and protective suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

No special environmental precautions required.

Cleanup methods

Take up mechanically, placing in appropriate containers for disposal.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Always wear recommended Personal Protective Equipment. See Section 8 for more detail. Do not get in eyes, on skin, or on clothing. Do not ingest. If during normal use the material presents a respiratory hazard, use adequate ventilation and/or wear appropriate respirator.

Storage

Keep in a dry, cool and well-ventilated place. Keep in properly labelled containers. Store in accordance with local regulations.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Solid
Colour
---
Colour Intensity
---
Form
---
Odor
Mixture has not been tested
Odor Threshold
Mixture has not been tested
Ph
No data available
Melting Point
°C Mixture has not been tested
Boiling Point
°C Mixture has not been tested
Flash Point
°C Mixture has not been tested
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No data
Vapor Pressure
Mixture has not been tested
Vapor Density
---
Relative Density
Mixture has not been tested
Bulk Density
---
Density
---
Flammability
Not Applicable
Upper Explosive Limit
Mixture has not been tested
Lower Explosive Limit
Mixture has not been tested
Explosive Limits
---
Auto Ignition Temperature
°C Mixture has not been tested
Decomposition Temperature
°C Mixture has not been tested
Solubility
Mixture has not been tested
Partition Coefficient
No data
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

None known.

Hazardous reactions

Hazardous reaction has not been reported.

Avoid

None known.

Incompatible

No dangerous reaction known under conditions of normal use.

Decomposition

No known hazardous decomposition products.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

Toxicity

The environmental impact of this product has not been fully investigated. | Chemical Name | Freshwater Algae Data | Water Flea Data | Freshwater Fish Species Data | Microtox Data | log Pow | | --- | --- | --- | --- | --- | --- | | Benzenesulfonyl fluoride, 4-(2-aminoethyl)-, hydrochloride | No data available | No data available | No data available | No data available | No data available |

The environmental impact of this product has not been fully investigated.

Persistence and degradability

No information available.

Bioaccumulative potential

No information available.

Mobility in soil

Results of PBT and vPvB assessment

No information available.

Endocrine disrupting properties

Other adverse effects

No information available.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

The generation of waste should be avoided or minimized wherever possible. This material and its container must be disposed of in according to approved disposal technique.

Disposal

Disposal of this product, its solutions or of any by-products, shall comply with the requirements of all applicable local, regional or national/federal regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1759
Shipping Name
Corrosive solids, n.o.s. (Benzenesulfonyl fluoride, 4-(2-aminoethyl)-, hydrochloride (1:1))
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Pierce Protease Inhibitor Tablets?

The signal word is danger.

What is the physical form of Pierce Protease Inhibitor Tablets?

Pierce Protease Inhibitor Tablets is a solid appearing as solid . It has mixture has not been tested odor.

What is the solubility of Pierce Protease Inhibitor Tablets?

Mixture has not been tested

What is Pierce Protease Inhibitor Tablets used for?

Use as laboratory reagent, Scientific research and development

What are the hazard statements for Pierce Protease Inhibitor Tablets?

This substance has 1 hazard statement:

  • H314: Causes severe skin burns and eye damage

What is the melting point of Pierce Protease Inhibitor Tablets?

The melting point is °C Mixture has not been tested and the boiling point is °C Mixture has not been tested.