Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TritonX-100, Electrophoresis Reagent
- Product Code
- J66624
- Synonyms
- Polyoxyethylene(10) octylphenyl ether
Regulatory Identifiers
- CAS Number
- 9002-93-1 Check regulations →
Identified Uses
Laboratory chemicals.
Uses advised against
Food, drug, pesticide or biocidal product use.
Manufacturers & Suppliers
Thermo Fisher Scientific Chemicals, Inc.
manufacturer
30 Bond Street, Ward Hill, MA 01835-8099
800-343-0660
Emergency Contacts
Information US
001-800-227-6701
Information Europe
+32 14 57 52 11
Emergency Number US
001-201-796-7100
Emergency Number Europe
+32 14 57 52 99
CHEMTREC
001-800-424-9300
CHEMTREC
001-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Poly(oxy-1,2-ethanediyl), .alpha.-[4-(1,1,3,3-tetramethylbutyl)phenyl]-.omega.-hydroxy- | 9002-93-1 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration. Get medical attention if symptoms occur.
Wash off immediately with plenty of water for at least 15 minutes. If skin irritation persists, call a physician.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Symptoms: Causes severe eye damage. Causes eye burns.
Clean mouth with water and drink afterwards plenty of water.
Medical Treatment
Treat symptomatically
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, carbon dioxide (CO2), dry chemical, alcohol-resistant foam.
No information available
Thermal decomposition can lead to release of irritating gases and vapors. Keep product and empty container away from heat and sources of ignition.
Keep product and empty container away from heat and sources of ignition.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not flush into surface water or sanitary sewer system.
Toak up with inert absorbent material. Keep in suitable, closed containers for disposal.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Ethidium bromide, Electrophoresis Reagent
CAS: 1239-45-8
TRIS (1.0M Tris HCl pH 7.4)
---
Titriplex® II for analysis (ethylenedinitrilotetraacetic acid) ACS, Reag. Ph Eur
CAS: 60-00-4
Titriplex® III for analysis (ethylenedinitrilotetraacetic acid, disodium salt dihydrate) ACS, ISO, Reag. Ph Eur
CAS: 6381-92-6
Tris-MOPS-SDS Running Buffer Powder
---
Target Retrieval Solution, High pH, 50x
---
Titriplex® III GR for analysis (ethylenedinitrilotetraacetic acid, disodium salt dihydrate) ACS, ISO, Reag. Ph Eur
---
Bio-Rad Protein Assay Dye Reagent Concentrate
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment/face protection. Ensure adequate ventilation. Do not get in eyes, on skin, or on clothing. Avoid ingestion and inhalation.
Keep containers tightly closed in a dry, cool and well-ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Ensure that eyewash stations and safety showers are close to the workstation location.
Wear appropriate protective gloves
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
No special protective equipment required. Recommended Filter type: Particulates filter conforming to EN 143.
Wear appropriate protective clothing to prevent skin exposure.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known, based on information available
None under normal processing. Hazardous polymerization does not occur.
Incompatible products. Excess heat. Exposure to air. Exposure to light. Exposure to moisture.
Strong oxidizing agents, Strong acids, Strong reducing agents
Carbon monoxide (CO), Carbon dioxide (CO₂), Aldehydes, Ketones, Formaldehyde, peroxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is TritonX-100, Electrophoresis Reagent known by?
TritonX-100, Electrophoresis Reagent is also known as: Polyoxyethylene(10) octylphenyl ether
What is the hazard signal word for TritonX-100, Electrophoresis Reagent?
The signal word is danger.
What is the physical form of TritonX-100, Electrophoresis Reagent?
TritonX-100, Electrophoresis Reagent is a liquid appearing as yellow with yellow color. It has characteristic odor.
What is the solubility of TritonX-100, Electrophoresis Reagent?
No information available
What is TritonX-100, Electrophoresis Reagent used for?
Laboratory chemicals.
What are the hazard statements for TritonX-100, Electrophoresis Reagent?
This substance has 2 hazard statements:
- H302: Harmful if swallowed
- H318: Causes serious eye damage
What is the melting point of TritonX-100, Electrophoresis Reagent?
The melting point is 6 °C / 42.8 °F and the boiling point is 270 °C / 518 °F @ 760 mmHg.