Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Tip Trimmer grinding liquid
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Water soluble, ready to use grinding liquid.
Manufacturers & Suppliers
AP Tignology ApS
manufacturer
Smedevaenget 8, 9596 Hadsund
+45 3214 3211
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Water | 7732-18-5 | 98% | No |
| 2-(2-butoxyethoxy)ethanol EC: 203-961-6 | 112-34-5 | 1% | Yes |
| N,N-Bis(2-hydroxyethyl)oleamid EC: 202-281-7 | 93-83-4 | 1% | Yes |
| Destilates (petroleum) Hydrotreated heavy naphthenic distillates. | 6742-52-5 | 1% | No |
| Ortho boric acid, compound with 2-Aminoethanol EC: 247-421-8 | 26038-87-9 | 1% | Yes |
| Ortho boric acid, compound with 2,2'-Iminodiethanol EC: 267-886-0 | 67952-33-4 | 1% | Yes |
| Natriumbenzoat EC: 208-534-8 | 532-32-1 | 1% | No |
| Alkanolamine connection | --- | 0.1% | No |
| Glycol derivaten | --- | 0.1% | No |
| Dye and Tartrazin | --- | 0.1% | No |
Notes
The full text of H / R-phrasesr - see section 16. The OELs, if available, is reproduced in section 8.
First Aid Measures
Emergency procedures for chemical exposure incidents
Lead the person into fresh air and keep the person under watch.
Remove contaminated clothing and shoes at once. If there has been contact to some skin, wash is thoroughly with water and soap. Skin cleansing remedies can be used. DO NOT use solvents or a thinner. Rinse with water until the pain stops and continue for 30 minutes.
Remove contact lenses. Flush eyes immediately with plenty of water (20-30 °C), until irritation cease and for at least 15 min. At continuously problem, Contact a physician.
Give the person plenty to drink and keep the person under watch. If fainting: Contact a physician immediately and bring along this security datasheet or the label from the product. Do not induce vomiting, unless recommended by the physician. Lower the persons head, so that vomit do not run back into the mouth or throat.
Immediate Medical Attention
Contact a physician or the emergency room - bring the label or the safety data sheet. If fainting: Contact a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
alcohol resistant foam, carbonic acid, powder, fog.
Usage of a water beam is forbidden, since it can spread the fire.
If the product gets exposed to high temperature, as in case of a fire, dangerous demolition products gets created. These are: Carbon oxides. A thick black fog will develop in case of fire. If delaying the decomposition products, a danger to ones health is at risk.
A closed container, which is exposed to fire, should be cooled with water.
Firefighter Protection
Fire fighters should use proper protection gear. Wear self-contained breathing apparatus and protective clothing to prevent contact.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation of damps from wasted substances.
No specific demands.
Sweep up spills carefully. If possible, clean with cleaning supplies. Solvents should be avoided.
Materials: cleaning supplies
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
See section on 'Exposure controls/personal protection' for information on personal protection.
Always store in the same container as the original material. Frost-free, max storage 35°C.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Show normally causion when using the liquid. Avoid inhalation of gasses and dust.
Recommended: Nitrile rubber. Breakthrough time: 480 minutes, or similar gloves.
Safety goggles recommended where eye contact is possible.
No specific demands.
No specific demands.
No specific demands.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under the conditions, noted in the section „Handlig and Storage“.
No data available
Non specific.
Avoid heating to prevent overpressure.
Strong acids, strong bases, strong oxidations remedies and strong reduction remedies
The product is not degraded when used as specified in the section „Identification of the grinding liquid...“
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Used can be disposed according to state regulations or returned to: AP Tignology ApS, Smedevænget 8, 9596 Hadsund
Used can be disposed according to state regulations or returned to: AP Tignology ApS, Smedevænget 8, 9596 Hadsund
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
2230010667, SDS Saftydatasheet
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Tip Trimmer grinding liquid?
The signal word is no signal word.
What is the physical form of Tip Trimmer grinding liquid?
Tip Trimmer grinding liquid is a liquid with green color. It has week odor.
What is Tip Trimmer grinding liquid used for?
Water soluble, ready to use grinding liquid.
What is the melting point of Tip Trimmer grinding liquid?
The melting point is <0 °C and the boiling point is - C.