Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE SF 7063 known as Loctite 7063
- Chemical Name
- Naphtha, hydrotreated light, <0,1% benzene
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Solvent based cleaner
Manufacturers & Suppliers
Henkel Ltd
manufacturer
Wood Lane End, HP2 4RQ Hemel Hempstead, Great Britain
+44 1442 278000
Emergency Contacts
Emergency Contact
+44 (0)1442 278497
24 Hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Solvent cleaner
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphtha, hydrotreated light, <0,1% benzene | 64742-49-0 | 50 - 100% | Yes |
| Ethanol EC: 200-578-6 | 64-17-5 | 10 - 20% | Yes |
| Methylal EC: 203-714-2 | 109-87-5 | 10 - 20% | Yes |
| Carbon dioxide EC: 204-696-9 | 124-38-9 | 5 - 10% | Yes |
Declaration of ingredients according to Detergent Regulation 648/2004/EC: 30 % aliphatic hydrocarbons
Notes
For full text of the H - statements and other abbreviations see section 16 "Other information". Substances without classification may have community workplace exposure limits available.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, seek medical advice.
Symptoms: drowsiness and dizziness
Rinse with running water and soap. Obtain medical attention if irritation persists.
Symptoms: Redness, inflammation.
Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist.
Symptoms: eye irritation
Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, extinguishing powder, carbon dioxide.
None known
Vapours may accumulate in low or confined areas, travel considerable distance to source of ignition, and flash back.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not let product enter drains.
Wipe up using absorbent material.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
LOCTITE SF 7031 known as Loctite 7031
---
LOCTITE SF 7063
---
LOCTITE SF 7039
---
LOCTITE SF 7649 known as Loctite 7649
---
LOCTITE SF 7200 known as Loctite 7200
---
LOCTITE SF 7649
---
LOCTITE EA 3463 known as Loctite 3463
UFI: NDFE-AWK6-X20Y-F9VF
LOCTITE SF 7840
UFI: Y5G7-SXF9-J20R-N0DE
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from sources of ignition - no smoking. Vapours should be extracted to avoid inhalation. Use only in well-ventilated areas.
Store in a cool, dry place. Do not store near sources of heat or ignition, or reactive materials. Almacenar entre 0°C and 32°C.
Wash hands before work breaks and after finishing work. Do not eat, drink or smoke while working. Good industrial hygiene practices should be observed.
Keep away from sources of ignition - no smoking. Do not store near sources of heat or ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation/extraction.
Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness). If signs of wear and tear are noticed then the gloves should be replaced.
Safety glasses with sideshields or chemical safety goggles should be worn if there is a risk of splashing. Protective eye equipment should conform to EN166.
Ensure adequate ventilation. An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly ventilated area. Filter type: A (EN 14387)
Wear suitable protective clothing. Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Strong oxidizing agents.
See section reactivity
No decomposition if used according to specifications. Heat, flames, sparks and other sources of ignition.
See section reactivity
None if used for intended purpose.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of according to regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
not applicable
not applicable
not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE SF 7063 known as Loctite 7063?
The signal word is danger.
What is the physical form of LOCTITE SF 7063 known as Loctite 7063?
LOCTITE SF 7063 known as Loctite 7063 is a aerosol appearing as aerosol, colourless with colourless color. It has hydrocarbons odor.
What is the solubility of LOCTITE SF 7063 known as Loctite 7063?
Not miscible (Solvent: Water), Miscible (Solvent: Acetone)
What is LOCTITE SF 7063 known as Loctite 7063 used for?
Solvent based cleaner
What are the hazard statements for LOCTITE SF 7063 known as Loctite 7063?
This substance has 5 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of LOCTITE SF 7063 known as Loctite 7063?
The melting point is No data available / Not applicable and the boiling point is -78 °C (-108.4 °F).