Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE SF 7070
- Product Form
- Solvent based cleaner
- Product Code
- 147514
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C11-C12, isoalkanes, < 2% aromatics | 64742-48-9 | 80 - 100% | Yes |
| Limonene, D- | 5989-27-5 | 10 - 30% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Wash with soap and water. Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention.
Immediately flush eyes with plenty of water for at least 15 minutes. If eye irritation persists, consult a specialist.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Not available.
Vapors may accumulate in low or confined areas, travel considerable distance to source of ignition, and flash back.
Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA). Water may be unsuitable as an extinguishing media, but may be helpful in keeping adjacent containers cool. Avoid spreading liquid with water used for cooling purposes.
Firefighter Protection
Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up.
Maintain good ventilation for large spills.
Do not allow product to enter sewer or waterways.
Spilled material will solidify.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep container closed. Use only with adequate ventilation. Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Wash thoroughly after handling. Do not wear contact lenses. Keep out of the reach of children.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling. Do not wear contact lenses.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Local exhaust ventilation is recommended when general ventilation is not sufficient to control airborne contamination below occupational exposure limits. Provide local ventilation for prolonged use in a confined area. In case of insufficient ventilation, wear suitable respiratory equipment.
Chemical resistant, impermeable gloves.
Safety goggles or safety glasses with side shields.
Use only in well-ventilated areas. Use NIOSH approved respirator if there is potential to exceed exposure limit(s).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
Heat, flames, sparks and other sources of ignition. Fire or intense heat may cause violent rupture of packages.
Strong oxidizing agents. Acids and bases.
Oxides of carbon. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1268
- Shipping Name
- Petroleum distillates, n.o.s. (Stoddard Solvent)
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE SF 7070?
The signal word is danger.
What is the physical form of LOCTITE SF 7070?
LOCTITE SF 7070 is a liquid with blue, light color. It has hydrocarbons odor.
What is the solubility of LOCTITE SF 7070?
Insoluble Water; Miscible Acetone
What are the hazard statements for LOCTITE SF 7070?
This substance has 4 hazard statements:
- H226: FLAMMABLE LIQUID AND VAPOUR.
- H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
What is the melting point of LOCTITE SF 7070?
The melting point is Not applicable, Product is a liquid and the boiling point is 173 - 193 °C (343.4 - 379.4 °F).