Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
SIGMASHIELD 420 BASE GREY 5177 commonly used coating. professional applications, used by spraying..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS05
GHS07
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H226: Flammable liquid and vapor.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H332: Harmful if inhaled.
- H350: May cause cancer.
- H361: Suspected of damaging fertility or the unborn child.
- H372: Causes damage to organs through prolonged or repeated exposure.
Precautionary Statements
- P201: Obtain special instructions before use.
- P202: Do not handle until all safety precautions have been read and understood.
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P260: Do not breathe vapor.
- P264: Wash thoroughly after handling.
- P270: Do not eat, drink or smoke when using this product.
- P271: Use only outdoors or in a well-ventilated area.
- P272: Contaminated work clothing should not be allowed out of the workplace.
- P280: Wear protective gloves, protective clothing and eye or face protection.
- P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
- P304 + P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P308 + P313: IF exposed or concerned: Get medical advice or attention.
- P310: Immediately call a POISON CENTER or doctor.
- P312: Call a POISON CENTER or doctor if you feel unwell.
- P333 + P313: If skin irritation or rash occurs: Get medical advice or attention.
- P405: Store locked up.
- P501: Dispose of contents and container in accordance with all local, regional, national and international regulations.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
PPG Industries, Inc.
manufacturer
One PPG Place Pittsburgh, PA 15272
US
888-977-4762
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
(412) 434-4515
US
Emergency Contact
(514) 645-1320
CA
SETIQ Interior de la Repblica
800-00-214-00
MX
SETIQ Ciudad de Mxico
(55) 5559-1588
MX
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
General Composition
There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| crystalline silica, respirable powder (<10 microns) | 14808-60-7 | 20-50% | ⚠️ Hazardous |
| bis-[4-(2,3-poxypropoxy)phnyl]propane EC: 216-823-5 | 1675-54-3 | 20-50% | ⚠️ Hazardous |
| talc EC: 238-877-9 | 14807-96-6 | 5-10% | ⚠️ Hazardous |
| xylene isomers mixture EC: 905-215-1 | 1330-20-7 | 5-8.2% | ⚠️ Hazardous |
| Titaandioxde EC: 236-675-5 | 13463-67-7 | 5-10% | ⚠️ Hazardous |
| crystalline silica, respirable powder (<10 microns) | 14808-60-7 | 1-5% | ⚠️ Hazardous |
| 4-NONYLPHENOL, BRANCHED EC: 284-325-5 | 84852-15-3 | 1-3.4% | ⚠️ Hazardous |
| 2-methylpropan-1-ol | 78-83-1 | 1.6% | ⚠️ Hazardous |
| thylbenzne | 100-41-4 | 1.6% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.
Symptoms:
Harmful if inhaled.
🖐️ Skin Contact
Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water or use recognized skin cleanser. Do NOT use solvents or thinners.
Symptoms:
Causes skin irritation. Defatting to the skin. May cause an allergic skin reaction.
👁️ Eye Contact
Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Seek immediate medical attention.
Symptoms:
Causes serious eye damage.
🍽️ Ingestion/Swallowing
If swallowed, seek medical advice immediately and show this container or label. Keep person warm and at rest. Do NOT induce vomiting.
Symptoms:
Corrosive to the digestive tract. Causes burns.
🚨 Immediate Medical Attention Required
Seek immediate medical attention for eye contact. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.
Medical Treatment
Treat symptomatically. No specific treatment.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. The engineering controls also need to keep gas, vapor or dust concentrations below any lower explosive limits. Use explosion-proof ventilation equipment.
🧤 Hand Protection
Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Considering the parameters specified by the glove manufacturer, check during use that the gloves are still retaining their protective properties. It should be noted that the time to breakthrough for any glove material may be different for different glove manufacturers. In the case of mixtures, consisting of several substances, the protection time of the gloves cannot be accurately estimated. Gloves : butyl rubber
👁️ Eye Protection
Chemical splash goggles and face shield.
😷 Respiratory Protection
Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. If workers are exposed to concentrations above the exposure limit, they must use appropriate, certified respirators. Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary.
🦺 Skin/Body Protection
Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. When there is a risk of ignition from static electricity, wear anti-static protective clothing. For the greatest protection from static discharges, clothing should include anti-static overalls, boots and gloves. Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
🌍 Environmental Exposure Controls
Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1263
📦 Proper Shipping Name
PAINT
⚠️ Transport Hazard Class
3
📋 Packing Group
III
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for SIGMASHIELD 420 BASE GREY 5177?
The signal word for this substance is "danger".
What is the physical form of SIGMASHIELD 420 BASE GREY 5177?
SIGMASHIELD 420 BASE GREY 5177 is a liquid with various color. It has characteristic odor.
What is the solubility of SIGMASHIELD 420 BASE GREY 5177?
cold water Not soluble
What is SIGMASHIELD 420 BASE GREY 5177 used for?
Coating. Professional applications, Used by spraying.
What are the hazard statements for SIGMASHIELD 420 BASE GREY 5177?
This substance has 8 hazard statements: H226: Flammable liquid and vapor. H315: Causes skin irritation. H317: May cause an allergic skin reaction. H318: Causes serious eye damage. H332: Harmful if inhaled. H350: May cause cancer. H361: Suspected of damaging fertility or the unborn child. H372: Causes damage to organs through prolonged or repeated exposure.
What is the melting point of SIGMASHIELD 420 BASE GREY 5177?
The melting point is Not available and the boiling point is >37.78C (>100F).