Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- JIG & TOOL PROTECTOR
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Tool and Nozzle Protection
Manufacturers & Suppliers
ESAB DENTON
national supplier
2800 Airport Road, Denton, TX 76207
http://www.esab.com
Emergency Contacts
Emergency Contact
1-800-372-2123
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS04
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from exposure, provide fresh air. If rapid recovery does not occur, obtain medical attention
Generally the product does not irritate the skin. Wash affected skin with water and mild soap.
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician immediately. Continue rinsing eyes during transport to hospital.
Obtain medical assistance if irritation persists. Do not induce vomiting.
Immediate Medical Attention
If rapid recovery does not occur, obtain medical attention; consult a physician immediately; obtain medical assistance if irritation persists.
Medical Treatment
Not applicable
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use the extinguishing media recommended for the burning materials and fire situation. (eg foam, CO2, dry chemical powder, water spray, etc.)
Fumes or vapors may be harmful.
Remove containers that are close to the fire.
Firefighter Protection
Wear self-contained breathing apparatus as fumes or vapors may be harmful.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter sewers/ surface or ground water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle with care. Ensure effective ventilation. Avoid contact with skin and eyes. Avoid inhalation of vapor or mist. Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C, i.e. electric lights. Pressurized container: Do not pierce or burn, even after use.
Observe official regulations on storing pressurized containers. Do not ingest. Smoking, eating and drinking is prohibited in areas of storage and use.
Smoking, eating and drinking is prohibited in areas of storage and use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation/exhaustion at the workplace.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This product is stable under normal conditions.
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Discard any product, residue, disposable container or liner in an environmentally acceptable manner, in full compliance with federal and local regulations. Use recycling procedures if available.
Discard any product, residue, disposable container or liner in an environmentally acceptable manner, in full compliance with federal and local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Void
Warning: Gases
Warning: Gases
Warning: Gases
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Read and understand the manufacturer's instructions, your employer's safety practices and the health and safety instructions on the label. Observe any federal and local regulations. Take precautions when welding and protect yourself and others. Warning! Pressurized container Do not breathe aerosols. Wear correct personal protection
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for JIG & TOOL PROTECTOR?
The signal word is danger.
What is the physical form of JIG & TOOL PROTECTOR?
JIG & TOOL PROTECTOR is a aerosol appearing as not applicable with not applicable color. It has not applicable odor.
What is the solubility of JIG & TOOL PROTECTOR?
Not applicable
What is JIG & TOOL PROTECTOR used for?
Tool and Nozzle Protection
What are the hazard statements for JIG & TOOL PROTECTOR?
This substance has 4 hazard statements:
- H220: Extremely flammable gas.
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of JIG & TOOL PROTECTOR?
The melting point is Not applicable and the boiling point is -44 °C.