Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TOOL SAVER
- Product Code
- MS217
- Chemical Name
- SAW BLADE LUBRICANT
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
DOALL COMPANY
manufacturer
1480 S. WOLF ROAD, WHEELING, IL 60090
(888) 362-5572 EXT. 65047
Emergency Contacts
INFOTRAC
(800) 535-5053
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS07
GHS08
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| PARRAFIN WAX | 64742-51-4 | 40% | No |
| SEVERELY HYDROTREATED NAPHTHENIC OIL | 64742-52-5 | 36% | No |
| MICROCRYSTALLINE WAX | 64742-42-3 | 17% | No |
| TALLOW | 8015-86-9 | 5% | No |
| CARNAUBA WAX | --- | 2% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
REMOVE INDIVIDUAL TO FRESH AIR. GIVE OXYGEN IF BREATHING IS LABORED. IF BREATHING HAS STOPPED, GIVE ARTIFICIAL RESPIRATION.
THOROUGHLY WASH EXPOSED SKIN WITH SOAP AND WATER.
REMOVE CONTACT LENSES. FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 20 MINUTES. LIFTING UPPER AND LOWER LIDS OCCASIONALLY.
DO NOT INDUCE VOMITTING. CONTACT A POISON CONTROL CENTER. IMMEDIATELY DRINK TWO GLASSES OF WATER. NEVER GIVE ANYTHING TO AN UNCONSCIOUS PERSON.
Immediate Medical Attention
SEEK MEDICAL ATTENTION.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
ALCOHOL FOAM, CO2, DRY CHEMICAL, FOAM OR WATER FOG.
PRODUCT CAN PRODUCE DENSE SMOKE FROM OILS BURNING.
THE EXTINGUISHING MEDIA AGENTS MENTIONED MAY ALL BE SUITABLE FOR EXTINGUISHING FIRES INVOLVING THISY TYPE OF PRODUCT, DEPENDING ON SIZE OR POTENTIAL SIZE OF FIRE OR CIRCUMSTANCES RELATED TO THE SITUATION. PLAN FIRE PROTECTION AND RESPONSE STRATEGY THROUGH CONSULTATION WITH LOCAL FIRE PROTECTION AUTHORITIES OR APPROPRIATE SPECIALISTS.
Firefighter Protection
WEAR A FULL FACE POSITIVE PRESSURE SELF CONTAINED BREATHING APPARATUS (NIOSH/MSHA) AND PROTECTIVE GEAR WHEN FIGHTING FIRE.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
SCRAPE UP MATERIAL AND PLACE IN A CHEMICAL WASTE CONTAINER.
SCRAPE UP MATERIAL AND PLACE IN A CHEMICAL WASTE CONTAINER.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE FROM HEAT, SPARKS, AND OPEN FLAMES.
DO NOT STORE IN DIRECT SUNLIGHT, NEAR OPEN FLAMES/SPARKS OR AT TEMERPATURES EXCEEDING 120°F.
ISOLATE FROM HEAT, SPARKS, AND OPEN FLAMES.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
PROVIDE GENERAL AND/OR LOCAL EXHAUST VENTILATION TO CONTROL AIRBORNE LEVELS BELOW THE EXPOSURE GUIDELINE.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
STABLE UNDER NORMAL CONDITIONS.
HAZARDOUS POLYMERIZATION WILL NOT OCCUR IN NORMAL CONDITIONS.
KEEP AWAY FROM HEAT, SPARKS OR OPEN FLAMES.
METALS SUCH AS: ZINC, MAGNESIUM, ALUMINUM, AND GALVANIZED METALS. OXIDIZING MATERIAL. STRONG OXIDIZING AGENTS, STRONG ACID OR ALKALIES AND STRONG MINERAL ACIDS.
OXIDES OF CARBON AND NITROGEN.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TOOL SAVER?
The signal word is danger.
What is the physical form of TOOL SAVER?
TOOL SAVER is a solid appearing as green wax, solid . It has petroleum odor.
What are the hazard statements for TOOL SAVER?
This substance has 10 hazard statements:
- H302: INGESTION: THIS MATERIAL MAY BE HARMFUL IF SWALLOWED.
- H315: SKIN CONTACT: PROLONGED CONTACT MAY RESULT IN IRRITATION. IN MOLTEN STATE PRODUCT CAN CAUSE BURNS.
- H319: EYE CONTACT: MAY BE IRRITATING AND CAN CAUSE PAIN, TEARING, REDDENING AND SWELLING.
- H350: CARCINOGENICITY: LISTED BY NTP, IARC, AND OSHA: NO
- HMIS RATING: 0 - 1 - 0
- PRIMARY ROUTE(S) OF ENTRY: SKIN CONTACT, SKIN ABSORPTION, INHALATION, INGESTION, EYE CONTACT.
- ACCUTE TOXICITY: NOT DETERMINED
- EFFECTS OF OVEREXPOSURE:
- INHALATION: NONE EXPECTED.
- CHRONIC HAZARDS: THERE ARE NO FORESEEABLE USES OF THE PRODUCT THAT WOULD LEAD TO CHRONIC EXPOSURE.
What is the melting point of TOOL SAVER?
The melting point is 162°F, ASTM D127 and the boiling point is NONE DETERMINED.