Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- UTB AQUILLA 150
- Product Code
- 35025
Regulatory Identifiers
- CAS Number
- 64741-88-4 Check regulations →
- EC Number
- 265-090-8 Check regulations →
Identified Uses
Base oil for further processing, Having regard to the application proposed and identified by CONCAWE.
Uses advised against
No applications known.
Manufacturers & Suppliers
UTB B.V.
manufacturer
Mandenmakerstraat 21-25, 2984 AS Ridderkerk, Netherlands
+31 (0)88 0202 300
Emergency Contacts
CHEMTREC
+1-703-527-3887
24h a day / 7 days a week
Austria
+43 1 3649237
Belgium
+32 2 808 32 37
Bulgaria
+359 32 570 104
Czech Republic
+420 228 880 039
Denmark
+45 69 91 85 73
Germany
+49 69 643508409
Israel
+972 3-763-0639
Latvia
+371 66 165 504
Lithuania
+370 5 214 0238
Malaysia
+60 3-9212 5794
Macedonia
+389 2 551 7456
The Netherlands
+31 85 888 0596
Poland
+48 22 398 80 29
Romania
+40 376 300 026
Russia
+8 (800) 100-63-46
Sweden
+46 8 525 034 03
Slovenia
+386 1 888 80 16
Taiwan
+886 2 7741 4207
South Korea
080 822 1374
Ukraine
+380 94 710 1374
Hungary
+36 1 808 8425
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mineral oil
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Mineral oil | --- | --- | No |
The substance does not require registration according to Regulation (EC) No 1907/2006 [REACH]. [Item 2.7 d]
Notes
The substance does not require registration according to Regulation (EC) No 1907/2006 [REACH]. [Item 2.7 d] The mineral oils in the product contain less than 3% DMSO extract (IP 346).
First Aid Measures
Emergency procedures for chemical exposure incidents
In the event of symptoms take medical treatment. Remove the casualty into fresh air and keep him calm.
After contact with skin, wash immediately with plenty of water and soap. Consult a doctor if skin irritation persists. Remove contaminated clothing.
Separate eyelids, wash the eyes thoroughly with water (15 min.). Take medical treatment.
Do not induce vomiting - aspiration hazard. Summon a doctor immediately.
Immediate Medical Attention
Summon a doctor immediately. Take medical treatment.
Medical Treatment
Treat symptomatically
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, Dry powder, Carbon dioxide
Water
Pyrolysis products; Hydrocarbons; Carbon dioxide (CO2); Carbon monoxide (CO); Hydrogen sulfide (H2S); Nitrogen oxides (NOx); Phosphorus oxides; Smoke.
Firefighter Protection
In case of combustion use a suitable breathing apparatus. Wear full protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Exclude sources of ignition and ventilate the area. Avoid contact with skin, eyes and clothing. High risk of slipping due to leakage/spillage of product. Avoid breathing vapours.
Do not allow to enter drains or waterways. Prevent spread over a wide area (e.g. by containment or oil barriers).
Pick up with absorbent material
Materials: sand, sawdust, general-purpose binder, kieselguhr
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Hot product develops flammable vapours. Handle and open container with care. Avoid skin and eye contact. Avoid formation of oil dust.
Keep only in original packaging. Keep container tightly closed and dry. Keep in a cool place.
Keep away from sources of heat and ignition. Do not smoke. Take action to prevent static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures for preventing exposition. Organisational measures for preventing exposition. Provide adequate ventilation.
For this purpose, protective gloves are suitable, for instance, made by the company KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail: vertrieb@kcl.de with the following specification (tested as per EN374): Use Permanent hand contact Camatril (Item No: 731; Material: Nitrile; Minimum layer thickness: 0.33 mm; Burst time: 480 min) Dermatril (Item No: 740; Material: Nitrile; Minimum layer thickness: 0.11 mm; Burst time: 30 min) The protective gloves to be used must comply with the specifications of the EU directive 89/686/EEC and the standard EN374 derived from it. The above mentioned burst times are based on laboratory measurements of KCL made as per EN 374 and a re applicable only for this KCL product. Preventive skin protection by protective skin ointment.
Tightly fitting safety glasses; Eye protection must comply with EN 166.
Not necessary, but do not inhale vapours. In situations where misting or flying may occur use appropriate certified respirators. Short term: filter apparatus, combination filter A-P2
Clothing as usual in the chemical industry. Protective gloves resistant to chemicals; With steel toe cap.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage and handling conditions (see section 7).
No hazardous reactions when stored and handled according to prescribed instructions.
Evolution of flammable mixtures possible in air when heated above flash point and/or during spraying or misting.
Oxidising agents
None known
Refer to section 5.3.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal as per EC directive 75/442/ECC and 91/689/ECC on waste and hazardous waste in the current versions as amended from time to time.
Dispose of waste according to applicable legislation.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for UTB AQUILLA 150?
The signal word is no signal word.
What is the physical form of UTB AQUILLA 150?
UTB AQUILLA 150 is a liquid with light yellow color. It has characteristic odor.
What is the solubility of UTB AQUILLA 150?
virtually insoluble
What is UTB AQUILLA 150 used for?
Base oil for further processing, Having regard to the application proposed and identified by CONCAWE.
What is the melting point of UTB AQUILLA 150?
The melting point is not determined and the boiling point is > 300 °C.