Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ALU FREEZE G12+
- Product Code
- ARD080001
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Engine Antifreeze; SU3 Industrial uses; SU21 Consumer uses; SU22 Professional uses; PC16 Heat transfer fluids
Manufacturers & Suppliers
VROMAN NV
manufacturer
Oudenaardestraat 49, 8570 Vichte
0032 56 72 62 29
Emergency Contacts
Emergency Contact
0032 56 72 62 29
9 AM to 4 PM, Monday to Friday
National Poison Information Centre (NVIC)
+31 30 - 2748888
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ethanediol EC: 203-473-3 | 107-21-1 | 50 - 100% | Yes |
| sodium-2-hexanoate EC: 243-283-8 | 19766-89-3 | 2.5 - 10% | Yes |
For the wording of the listed risk phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water.
Call for a doctor immediately.
Immediate Medical Attention
If swallowed or in case of vomiting, danger of entering the lungs.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, dry chemical, or foam. Water can be used to cool and protect exposed material.
Formation of toxic gases is possible during heating or in case of fire.
Firefighter Protection
Wear self-contained respiratory protective device. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Dilute with plenty of water.
Absorb with liquid-binding material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
Store in cool, dry conditions in well sealed receptacles. Store only in the original receptacle.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Wear gloves for the protection against chemicals according to EN 374. Material of gloves: Butyl rubber, BR. Recommended thickness of the material: 0.35 mm. For continuous contact we recommend gloves with breakthrough time of more than 240 minutes with preference for > 480 minutes. For short-term/splash protection we recommend the same, but recognise that suitable gloves offering this level of protection may not be available and in this case a lower breakthrough time may be acceptable so long as appropriate maintenance and replacement regimes are followed.
Goggles recommended during refilling
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Reacts with strong oxidising agents.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Void
- Shipping Name
- Void
- Transport Class
- Void
- Packing Group
- Void
Not applicable.
Not applicable.
Not applicable.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ALU FREEZE G12+?
The signal word is warning.
What is the physical form of ALU FREEZE G12+?
ALU FREEZE G12+ is a fluid appearing as fluid with pink color. It has odourless odor.
What is ALU FREEZE G12+ used for?
Engine Antifreeze; SU3 Industrial uses; SU21 Consumer uses; SU22 Professional uses; PC16 Heat transfer fluids
What are the hazard statements for ALU FREEZE G12+?
This substance has 3 hazard statements:
- H302: Harmful if swallowed.
- H361d: Suspected of damaging the unborn child.
- H373: May cause damage to the kidneys through prolonged or repeated exposure. Route of exposure: Oral.
What is the melting point of ALU FREEZE G12+?
The melting point is Undetermined. and the boiling point is 109 °C.