Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FREEZCOOL RED
- Product Code
- 200000016009
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- A3KE-NEX7-VMGV-VKXG
Identified Uses
Reserved for industrial and professional use.
Uses advised against
Not known. Read this SDS before using this product.
Manufacturers & Suppliers
Lincoln Electric Europe S.L.
manufacturer
Calle Balmes, 89 8th floor, 2a, Barcelona 08008, Spain
+34 93 492 20 00
http://www.lincolnelectric.com/sds
Lincoln Electric Europe B.V.
manufacturer
Nieuwe Dukenburgseweg 20, Nijmegen 6534AD, The Netherlands
+31 243 522 911
http://www.lincolnelectric.com/sds
Emergency Contacts
Emergency Contact
+1 (888) 609-1762
Emergency Contact
+1 (216) 383-8962
Emergency Contact
+1 (216) 383-8966
Emergency Contact
+1 (216) 383-8969
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Propylene glycol EC: 200-338-0 | 57-55-6 | 20 - 50% | No |
* All concentrations are percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume. # This substance has workplace exposure limit(s). ## This substance is listed as SVHC CLP: Regulation No. 1272/2008. The full text for all H-statements is displayed in section 16.
Notes
The term "Hazardous Ingredients" should be interpreted as a term defined in Hazard Communication standards and does not necessarily imply the existence of a welding hazard. The product may contain additional non-hazardous ingredients or may form additional compounds under the condition of use. Refer to Sections 2 and 8 for more information.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air if breathing is difficult. If breathing has stopped, perform artificial respiration and obtain medical assistance at once.
Remove contaminated clothing and wash the skin thoroughly with soap and water.
Do not rub eye. Any material that contacts the eye should be washed out immediately with water. If easy to do, remove contact lenses. Continue to rinse for at least 15 minutes.
Rinse mouth thoroughly.
Immediate Medical Attention
For reddened or blistered skin, or thermal burns, obtain medical assistance at once. Get medical attention promptly if symptoms occur after washing.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire-extinguishing media appropriate for surrounding materials.
Do not use water jet as an extinguisher, as this will spread the fire.
During fire, gases hazardous to health may be formed.
Use standard firefighting procedures and consider the hazards of other involved materials.
Firefighter Protection
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
If airborne dust and/or fume is present, use adequate engineering controls and, if needed, personal protection to prevent overexposure. Refer to recommendations in Section 8.
Avoid release to the environment. Prevent further leakage or spillage if safe to do so.
Absorb with sand or other inert absorbent. Clean up spills immediately, observing precautions in the personal protective equipment in Section 8.
Materials: sand or other inert absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices.
Store in closed original container in a dry place. Store in accordance with local/regional/national regulations.
Observe good industrial hygiene practices.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Observe Occupational Exposure Limits and minimize the risk of inhalation.
Wear protective gloves. Suitable gloves can be recommended by the glove supplier.
Wear goggles/face shield.
In case of inadequate ventilation use suitable respirator. Seek advice from local supervisor.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
None under normal conditions.
Avoid heat or contamination.
Strong acids. Strong oxidizing substances. Strong bases.
Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FREEZCOOL RED?
The signal word is no signal word.
What is the physical form of FREEZCOOL RED?
FREEZCOOL RED is a liquid appearing as no data available. with red color. It has no data available. odor.
What is FREEZCOOL RED used for?
Reserved for industrial and professional use.