Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- HONEYSACLE HYDRO 23236
- Product Form
- mixture of aromatic raw materials
- Product Code
- P623236
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial. For professional use.
Manufacturers & Suppliers
J et E SOZIO DESCOLLONGES
manufacturer
6, Rue Barbès. 92305. LEVALLOIS PERRET. FRANCE
33.1.81.93.00.60
http://www.jesozio.com
Emergency Contacts
ORFILA
33 (0) 1 45 42 59 59
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Alcools gras éthoxylés EC: 931-138-8 | 69011-36-5 | 5 - 10% | Yes |
| 1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylcyclopenta-gamma-2-benzopyran (HHCB) EC: 214-946-9 | 1222-05-5 | 5% | Yes |
| Cyclamen aldehyde EC: 203-161-7 | 103-95-7 | 5% | Yes |
| Ethyl methylphenylglycidate EC: 201-061-8 | 77-83-8 | 5% | Yes |
| Hexyl salicylate EC: 228-408-6 | 6259-76-3 | 5% | Yes |
| Linalool EC: 201-134-4 | 78-70-6 | 5% | Yes |
| Phenylethyl alcohol EC: 200-456-2 | 60-12-8 | 5% | Yes |
| alpha-Hexylcinnamal EC: 202-983-3 | 101-86-0 | 5% | Yes |
| p-tert-Butyl-alpha-methylhydrocinnamic aldehyde EC: 201-289-8 | 80-54-6 | 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Wash immediately with plenty of water and then soap. Rinse with clear water. Remove contaminated clothes and reuse only after decontamination.
Rinse with plenty of water (15 minutes open eyelids) and wash with ocular lotion type Dacryosérum. If disorder consult an ophthalmologist.
Consult a doctor and show the label
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight important fires with water spray or alcohol resistant foam.
Never use a direct jet of water.
The product is not flammable.
Do not smoke. Do not use flame near.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent contamination of soil and water, while entering into drains, ditches and rivers.
pump and rinse with water after recovery of specific waste plastic drums
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Close the packaging after use. Reproduce labelling if transfer in another container.
Preserve only in the container of origin in a fresh and well ventilated place. Keep the containers closed when not used. Do not leave it near heat source, direct sun rays. Keep aways from food and drinks.
Wash the hands and any other zone exposed with soap and water before eating, drinking, to smoke and before leaving work.
Do not leave it near heat source.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined places.
Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN374. Gloves must be selected according to the application and duration of use at the workstation. Protective gloves need to be selected according to their suitability for the workstation in question: other chemical products that may be handled, necessary physical protections (cutting, pricking, heat protection), level of dexterity required. Type of gloves recommended: Nitrile rubber (butadiene-acrylonitrile copolymer rubber (NBR)). Recommended properties: Impervious gloves in accordance with standard EN374
Avoid contact with eyes. Use ocular protection developed to protect against liquid splashes. Before handling, it is necessary to wear safety glasses in compliance with NF 166 standard.
The staff will wear regularly washed work clothes. After contact with the product, all the contaminated parts of the body should be washed.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
NOT APPLICABLE OR DATA NOT AVAILABLE
No dangerous reactions known.
NOT APPLICABLE OR DATA NOT AVAILABLE
NOT APPLICABLE OR DATA NOT AVAILABLE
NOT APPLICABLE OR DATA NOT AVAILABLE
Thermal decomposition may release / form: Carbon monoxide (CO), carbon dioxide (CO2)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Recycle or dispose in accordance with regulation in force, preferably by a collector or an approved company.
Do not discharge into drains or rivers. Do not contaminate the ground or water with waste, do not dispose of them in the environment.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for HONEYSACLE HYDRO 23236?
The signal word is danger.
What is the physical form of HONEYSACLE HYDRO 23236?
HONEYSACLE HYDRO 23236 is a liquid appearing as liquid with green color. It has characteristic odor.
What is the solubility of HONEYSACLE HYDRO 23236?
In water
What is HONEYSACLE HYDRO 23236 used for?
Industrial. For professional use.
What are the hazard statements for HONEYSACLE HYDRO 23236?
This substance has 3 hazard statements:
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H412: Harmful to aquatic life with long lasting effects.