Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TECHNOMELT PUR PRIMER 6B-23
- Synonyms
- PURMELT Primer 6 B - 23
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- SF6K-AWX7-M20Q-K32Y
Identified Uses
Primer
Manufacturers & Suppliers
Henkel Ltd
manufacturer
Adhesives, Wood Lane End, HP2 4RQ Hemel Hempstead, Great Britain
+44 (1442) 278000
http://www.mysds.henkel.com
Emergency Contacts
Emergency Contact
+44 0 8701 906777
24 Hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| dichloromethane EC: 200-838-9 | 75-09-2 | 80 - 100% | Yes |
| Ethanol EC: 200-578-6 | 64-17-5 | 1 - 3% | Yes |
Notes
If no ATE values are displayed, please refer to LD/LC50 values in Section 11. For full text of the H - statements and other abbreviations see section 16 "Other information".
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air, consult doctor if complaint persists.
Symptoms: Vapors may cause drowsiness and dizziness.
IF ON SKIN: Wash with plenty of soap and water. In case of adverse health effects seek medical advice.
Symptoms: Redness, inflammation.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Symptoms: Irritation, conjunctivitis.
Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor.
Immediate Medical Attention
Seek medical attention from a specialist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All common extinguishing agents are suitable.
High pressure waterjet
In case of fire toxic gases can be released.
Firefighter Protection
Wear self-contained breathing apparatus. Wear protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away. Avoid contact with skin and eyes. Danger of slipping on spilled product.
Do not empty into drains / surface water / ground water.
Remove with liquid-absorbing material (sand, peat, sawdust).
Materials: sand, peat, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not eat, drink or smoke while working. Wash hands before work breaks and after finishing work. Take off contaminated clothing and wash before reuse.
Store in sealed original container protected against moisture. Keep container tightly sealed. Store in a cool, well-ventilated place.
Do not eat, drink or smoke while working. Wash hands before work breaks and after finishing work. Take off contaminated clothing and wash before reuse.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only in well ventilated areas.
Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): Isobutylene-isoprene rubber (IIR; >= 0.7 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): Isobutylene-isoprene rubber (IIR; >= 0.7 mm thickness) This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.
Goggles which can be tightly sealed. Protective eye equipment should conform to EN166.
In case of aerosol formation, we recommend wearing of appropriate respiratory protection equipment with ABEK P2 filter (EN 14387). This recommendation should be matched to local conditions.
Wear protective equipment. Protective clothing that covers arms and legs. Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Oxidizers.
See section reactivity
Heat, flames, sparks and other sources of ignition.
See section reactivity.
No decomposition if used according to specifications.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
In consultation with the responsible local authority, must be subjected to special treatment.
In consultation with the responsible local authority, must be subjected to special treatment.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1593
- Shipping Name
- DICHLOROMETHANE
- Transport Class
- 6.1
- Packing Group
- III
not applicable
not applicable
not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is TECHNOMELT PUR PRIMER 6B-23 known by?
TECHNOMELT PUR PRIMER 6B-23 is also known as: PURMELT Primer 6 B - 23
What is the hazard signal word for TECHNOMELT PUR PRIMER 6B-23?
The signal word is warning.
What is the physical form of TECHNOMELT PUR PRIMER 6B-23?
TECHNOMELT PUR PRIMER 6B-23 is a liquid with colourless / colorless, up to, yellowish color. It has sweet odor.
What is the solubility of TECHNOMELT PUR PRIMER 6B-23?
Not miscible
What is TECHNOMELT PUR PRIMER 6B-23 used for?
Primer
What are the hazard statements for TECHNOMELT PUR PRIMER 6B-23?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H351: Suspected of causing cancer.
What is the melting point of TECHNOMELT PUR PRIMER 6B-23?
The melting point is -95 °C (-139 °F) and the boiling point is 40 °C (104 °F).