NextSDS Logo
Safety Data Sheet EN

UV6034 - DC1000 COUPGLANS

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
UV6034 - DC1000 COUPGLANS
Product Form
Article

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Professional use

Uses advised against

No additional information available

Manufacturers & Suppliers

GeKa Coatings logo

GeKa Coatings

distributor

Clemence dosschestraat 17, 9800 Deinze - België

+3293838819

http://www.gekacoatings.com

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319
Skin Sens. Cat. 1 H317
STOT SE Cat. 3 H335
Aquatic Chronic Cat. 2 H411

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P261 Avoid breathing vapours, spray, gas, fume, dust, mist.
P264 Wash Wash skin with plenty of water, hands, forearms and face, Take off immediately all contaminated clothing. thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P272 Contaminated work clothing should not be allowed out of the workplace.
P273 Avoid release to the environment.
P280 Wear protective gloves, protective clothing, face protection, eye protection.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Acrylic resin EC: 500-130-2 55818-57-0 20 - 30% Yes
(1-methyl-1,2-ethanediyl)bis[oxy(methyl-2,1-ethanediyl)]diacrylate EC: 256-032-2 42978-66-5 20 - 30% Yes
Benzophenone EC: 204-337-6 119-61-9 5 - 10% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing. Call a poison center or a doctor if you feel unwell.

Symptoms: May cause respiratory irritation.

Skin contact

Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs: Get medical advice/attention.

Symptoms: Irritation. May cause an allergic skin reaction.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Symptoms: Eye irritation.

Ingestion

Call a poison center or a doctor if you feel unwell.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray. Dry powder. Foam. Carbon dioxide.

Instructions

Do not attempt to take action without suitable protective equipment.

Firefighter Protection

Self-contained breathing apparatus. Complete protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ventilate spillage area. Avoid breathing dust/fume/gas/mist/vapours/spray. Avoid contact with skin and eyes.

Environmental

Avoid release to the environment.

Cleanup methods

Take up liquid spill into absorbent material.

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only outdoors or in a well-ventilated area. Avoid breathing dust/fume/gas/mist/vapours/spray. Avoid contact with skin and eyes. Wear personal protective equipment.

Storage

Store locked up. Store in a well-ventilated place. Keep container tightly closed. Keep cool.

Hygiene

Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure good ventilation of the work station.

Hands

Protective gloves

Eyes

Safety glasses

Respiratory

In case of insufficient ventilation, wear suitable respiratory equipment

Skin/Body

Wear suitable protective clothing

Environmental

Avoid release to the environment.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

State Under Standard Conditions
---
Auto Ignition Temperature
No data available
Density
---
Physical State
Liquid
Decomposition Temperature
No data available
Bulk Density
---
Flammability
Not applicable
Vapor Density
---
Melting Point
Not applicable
Odor
characteristic.
Boiling Point
> 200 °C
Upper Explosive Limit
No data available
Evaporation Rate
---
Properties Status
---
Odor Threshold
No data available
Crystallisation Point
---
Freezing Point
No data available
Metal Corrosion
---
Dynamic Viscosity
No data available
Colour
No data available
Relative Evaporation Rate
No data available
Physical State Data
liquid
Partition Coefficient
No data available
Voc Content
---
Lower Explosive Limit
No data available
Colour Intensity
---
Solidification Point
---
Softening Point
---
Vapor Pressure
No data available
Ph
6 - 8
Relative Density
1 - 1.3 g/cm³
Explosive Limits
---
Molecular Weight
---
Solubility In Fat
---
Form
---
Solubility
insoluble in water.
Appearance
Liquid.
Flash Point
> 100 °C
Cloud Point
---
Solubility In Water
---
Kinematic Viscosity
No data available
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

The product is non-reactive under normal conditions of use, storage and transport.

Hazardous reactions

No dangerous reactions known under normal conditions of use.

Avoid

None under recommended storage and handling conditions (see section 7).

Incompatible

No additional information available

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of contents/container in accordance with licensed collector's sorting instructions.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not applicable
Shipping Name
Not applicable
Transport Class
Not applicable
Packing Group
Not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for UV6034 - DC1000 COUPGLANS?

The signal word is warning.

What is the physical form of UV6034 - DC1000 COUPGLANS?

UV6034 - DC1000 COUPGLANS is a liquid appearing as liquid. with no data available color. It has characteristic. odor.

What is the solubility of UV6034 - DC1000 COUPGLANS?

insoluble in water.

What is UV6034 - DC1000 COUPGLANS used for?

Professional use

What are the hazard statements for UV6034 - DC1000 COUPGLANS?

This substance has 5 hazard statements:

  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.
  • H411: Toxic to aquatic life with long lasting effects.

What is the melting point of UV6034 - DC1000 COUPGLANS?

The melting point is Not applicable and the boiling point is > 200 °C.

Compliance Scanner

Scan your compliance