Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CPE 1365
- Product Form
- Substance
- Product Code
- 70360
- Chemical Name
- Chlorinated Polyethylene
Regulatory Identifiers
- CAS Number
- 64754-90-1 Check regulations →
Identified Uses
Industrial/Professional use spec : Industrial For professional use only
Uses advised against
No additional information available
Manufacturers & Suppliers
BETAQUIMICA, S.A.
manufacturer
Rambla Jaume Sàbat, 4 2a Planta, 08172 Sant Cugat del Vallès - España
+34 93 589 1242
http://www.betaquimica.com
Emergency Contacts
BETAQUIMICA, S.A.
+34 93 589 1242
Office hours (8:30-17:45h)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Chlorinated Polyethylene | 64754-90-1 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Allow affected person to breathe fresh air. Allow the victim to rest.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. Wash skin with plenty of water.
Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists. Rinse eyes with water as a precaution.
Symptoms: pain, blinking or redness
Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison center or a doctor if you feel unwell.
Immediate Medical Attention
Obtain emergency medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Do not use a heavy water stream.
The product is not flammable.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area. Evacuate unnecessary personnel.
Prevent entry to sewers and public waters. Avoid release to the environment.
On land, sweep or shovel into suitable containers.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Wear personal protective equipment. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Keep only in the original container in a cool, well ventilated place away from: Sources of ignition, sparks. Keep container closed when not in use. Store in a well-ventilated place. Keep cool.
Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Use special care to avoid static electric charges. Keep only in the original container in a cool, well ventilated place away from: Sources of ignition, sparks.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Wear protective gloves.
Chemical goggles or safety glasses
Where excessive dust may result, use approved respiratory protection equipment
If there is potential contact with hot/molten material, wear heat resistant clothing and footwear.
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Not established. Irritating gases may be emitted upon the temperature 160°C.
The product is non-reactive under normal conditions of use, storage and transport.
Hazardous polymerization may occur if exposed to high temperature.
Sparks. Temperature exceeding : 180°C.
See section 7.2.
Fumes. Carbon monoxide. Carbon dioxide. Vapors released during processing may include acid gases.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container in accordance with licensed collector's sorting instructions.
Dispose in a safe manner in accordance with local/national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CPE 1365?
The signal word is no signal word.
What is the physical form of CPE 1365?
CPE 1365 is a solid appearing as powder. with white. color. It has characteristic. odor.
What is the solubility of CPE 1365?
Insoluble in water.
What is CPE 1365 used for?
Industrial/Professional use spec : Industrial For professional use only
What is the melting point of CPE 1365?
The melting point is Not available and the boiling point is Not available.