Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CPE 1365
- Product Form
- Substance
- Product Code
- 70360
- Chemical Name
- Chlorinated Polyethylene
Regulatory Identifiers
- CAS Number
- 64754-90-1 Check regulations →
Identified Uses
Industrial/Professional use spec : Industrial, For professional use only
Uses advised against
No additional information available
Manufacturers & Suppliers
BETAQUIMICA, S.A.
manufacturer
Rambla Jaume Sàbat, 4 2a Planta, 08172 Sant Cugat del Vallès - España
http://www.betaquimica.com
Emergency Contacts
BETAQUIMICA, S.A.
+34 93 589 1242
Office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Substance type : Polymer Chemical name : Chlorinated Polyethylene CAS No : 64754-90-1
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Chlorinated Polyethylene | 64754-90-1 | 93% | No |
| Talc (Mg3H2(SiO3)4) EC: 238-877-9 | 14807-96-6 | 1% | No |
| Calcium carbonate EC: 207-439-9 | 471-34-1 | 5% | No |
| Calcium distearate EC: 216-472-8 | 1592-23-0 | 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Allow breathing of fresh air. Allow the victim to rest.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.
Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persist.
Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
Immediate Medical Attention
Obtain medical attention if pain, blinking or redness persist (eyes). Obtain emergency medical attention (ingestion).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Do not use a heavy water stream.
The product is not flammable.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Ventilate area.
Prevent entry to sewers and public waters. Avoid release to the environment.
On land, sweep or shovel into suitable containers.
Materials: suitable containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Keep only in the original container in a cool, well ventilated place away from: sparks, Sources of ignition. Keep container closed when not in use.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Use special care to avoid static electric charges. Proper grounding procedures to avoid static electricity should be followed. Keep only in the original container in a cool, well ventilated place away from: sparks, Sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear protective gloves
Chemical goggles or safety glasses
Where excessive dust may result, use approved respiratory protection equipment
If there is potential contact with hot/molten material, wear heat resistant clothing and footwear
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Not established. Irritating gases may be emitted upon the temperature 160°C.
No additional information available
Hazardous polymerization may occur if exposed to high temperature.
Sparks. Temperature exceeding : 180°C.
No additional information available
Fumes. Carbon monoxide. Carbon dioxide. Vapors released during processing may include acid gases.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in a safe manner in accordance with local/national regulations.
Dispose in a safe manner in accordance with local/national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CPE 1365?
The signal word is no signal word.
What is the physical form of CPE 1365?
CPE 1365 is a solid appearing as powder. with white. color. It has characteristic. odor.
What is the solubility of CPE 1365?
Insoluble in water.
What is CPE 1365 used for?
Industrial/Professional use spec : Industrial, For professional use only
What is the melting point of CPE 1365?
The melting point is No data available and the boiling point is No data available.